*This part replaces obsolete part #: 427411.
Product Information
Description:
| This is an authentic part that is supplied directly by the original equipment manufacturer for Craftsman lawn mowers. The drive cable assembly connects the handle drive control to the transmission which enables you to push the mower forward. This part is sold individually and is made of hard plastic and metal wire. You will need a screwdriver and needle nose pliers to aid you in this repair. Let the engine cool before you begin installing. |
Compatibility
This part is compatible with the following machines:
the 26 compatible machines
Questions & Answers
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Lawn Mower
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Drive cable broke
1. Put plastic over fuel tank and put cap back on.
2. Removed old drive cable from drive while mower turned on side---the hardest part is prying out the plastic grommet that holds the cable in place through a hole in mower deck.
3. Thread the cable through the cable tabs on mower handle.
4. Open up EZ plastic pack on mower handle--the screws are six point star heads and you need to have that in your screwdriver base.
5.Remove that part of old cable and put the new cable in the slot---make sure that the nut that fits in the slot is all the way up to the end otherwise it won't fit in slot.
6.Reassemble EZ plastic pack.
7. Start the mower and check the drive ---all good.
2. Removed old drive cable from drive while mower turned on side---the hardest part is prying out the plastic grommet that holds the cable in place through a hole in mower deck.
3. Thread the cable through the cable tabs on mower handle.
4. Open up EZ plastic pack on mower handle--the screws are six point star heads and you need to have that in your screwdriver base.
5.Remove that part of old cable and put the new cable in the slot---make sure that the nut that fits in the slot is all the way up to the end otherwise it won't fit in slot.
6.Reassemble EZ plastic pack.
7. Start the mower and check the drive ---all good.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
