Medium
15-30 minutes
This is an authentic Makita replacement part that is OEM sourced to ensure quality. The metal depth guide is intended to be used with circular saws. This item attaches to the foot assembly and is used as a rail that supports the depth adjustment knob. This item is available as an individual replacement part.
Depth Guide 345719-7
OEM part for: Makita
Part Number: 345719-7
$4.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 2 machines
Makita
5007MGA Magnesium Circular Saw View Diagrams & Manuals
5007MG Magnesium Circular Saw View Diagrams & Manuals
This item works with the following types of products:
- Circular Saw Parts
- Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy repair
It was easy enough once you realize there is a set screw on the bottom that loosens up the parts
Paul -
July 2, 2021
Verified Purchase
Perfect replacement
Read an earlier review that said don't try to straighten a bent depth guide. So true! This part isn't real expensive, arrived in a couple of days, and it only took a few minutes to swap out the old depth guard which got bent when I knocked the saw off onto a cement floor :-(
Steven -
May 11, 2020
Verified Purchase
Easy replacement of old part.
With just a few tools I replaced the bent guide with the new one and my saw was back to original. Cuts straight and square again.
Guest -
August 28, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Depth Guide
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Dropped my Makita Circular Saw 5007MGA and bent the depth guide
Merle - June 10, 2018
👍 2 of 2 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Hex socket set, M5X8
Parts Used
1. Want to ereplacementparts.com and looked at the nomenclature and printed it to include a full picture and listing of the parts.
2. Removed the blade
3. Remove the Rubber Sleeve so the Safety Cover can be moved and you can free up and remove the Cap Square Neck bolt M8X90. You'll need a Hex to remove a screw holding Depth Guide to the Base Complete.
4. Pull out the Cap Square Neck Bolt, observing how this all fits together. If you have a phone, maybe take a picture. If not, line it up so you have the parts in the right order.
5. Repeat in reverse order.
A word of wisdom...if you have this problem...don't try and straighten the depth guide. It only costs a few bucks and trying to straighten it will only drive you mad!
2. Removed the blade
3. Remove the Rubber Sleeve so the Safety Cover can be moved and you can free up and remove the Cap Square Neck bolt M8X90. You'll need a Hex to remove a screw holding Depth Guide to the Base Complete.
4. Pull out the Cap Square Neck Bolt, observing how this all fits together. If you have a phone, maybe take a picture. If not, line it up so you have the parts in the right order.
5. Repeat in reverse order.
A word of wisdom...if you have this problem...don't try and straighten the depth guide. It only costs a few bucks and trying to straighten it will only drive you mad!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bent Depth Gauge and worn out Rubber Sleeve
Steve - January 29, 2023
Tool Type
Circular Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set, Brush to clean out all of the saw
Parts Used
1. Used Allen Wrench to remove set screw on base plate to remove holding bolt on the guide
2. Removed the Rubber Sleeve to move the guard out of position.
3. Removed the securing stop ring.
4. Removed the thumb lock.
5. Removed the nut and washer.
6. Pulled out the bolt and replaced the depth guide.
7. Reverse procedure.
2. Removed the Rubber Sleeve to move the guard out of position.
3. Removed the securing stop ring.
4. Removed the thumb lock.
5. Removed the nut and washer.
6. Pulled out the bolt and replaced the depth guide.
7. Reverse procedure.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Base plate was not square to blade
Mike - August 29, 2019
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Hex set
Parts Used
1.Remove blade
2.Remove guard stop
3.Remove adjustment bolt from depth gauge and hex bolt and remove old depth gauge.
4.Align new gauge and reverse the above order. 3,2,1
2.Remove guard stop
3.Remove adjustment bolt from depth gauge and hex bolt and remove old depth gauge.
4.Align new gauge and reverse the above order. 3,2,1
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
