Easy
15-30 minutes
Genuine Makita replacement part, this item is sold individually.
This Guard is used on the Makita hand held Circular saw models shown below.
It is imperative that this part be used, it is very hazardous to use a saw with out this protective Guard.
As you are cutting your stock the Guard will telescope into the upper Guard keeping your hands and fingers away from the blade.
Safety Cover 319780-0
OEM part for: Makita
Part Number: 319780-0
$13.39
In Stock
Order within the next 11 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.40 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 16 machines
Makita
5007MGA Magnesium Circular Saw View Diagrams & Manuals
5007NK 7-1/4" Circular Saw View Diagrams & Manuals
5007MG Magnesium Circular Saw View Diagrams & Manuals
5007NFA Circular Saw View Diagrams & Manuals
5007N Circular Saw View Diagrams & Manuals
5007NFAK (Type 1) Saw View Diagrams & Manuals
5007NFAK (Type 2) Saw View Diagrams & Manuals
5007NFAK (Type 3) Saw View Diagrams & Manuals
5007NFA (Type 1) Saw View Diagrams & Manuals
5007NFA (Type 2) Saw View Diagrams & Manuals
5007NFA (Type 3) Saw View Diagrams & Manuals
5007NFK (Type 1) Saw View Diagrams & Manuals
5007NFK (Type 2) Saw View Diagrams & Manuals
5007NF (Type 1) Saw View Diagrams & Manuals
5007NF (Type 2) Saw View Diagrams & Manuals
5007N (Type 2) Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Circular Saw Parts
- Saw Parts
This part replaces obsolete part #: 318963-9, 318057-0
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Part fit perfect, quick delivery.
The saw was back in service as good as new.
dean -
January 24, 2023
Verified Purchase
Quick delivery exactly what I needed
Shipping was more than the part was worth, but other than that everything was great
Guest -
July 27, 2020
Verified Purchase
I wass very pleased
I have no criticism to make.
Guest -
October 3, 2019
Verified Purchase
Nice to find eReplacement parts!
Makita 5007 saw fell from table onto concrete; no longer available from Makita; checked online and found eReplacement. What a find; 1/3 less, here in 2 days! Still p-oh about dropping saw but glad eReplacement was here
Guest -
September 25, 2019
Verified Purchase
Easy repair
The part was a good match and took a couple minutes to install.
Mick -
September 2, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Safety Cover
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Blade guard broken from saw being dropped.
John - December 21, 2016
👍 7 of 7 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Retaining ring pliers
Parts Used
Take the blade off, retract the guard, unhook the spring, remove the retaining ring (with retaining pliers), slip out the old guard, slip in the new one, then put things back into place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Safety guard broken due to a drop
Donald - March 19, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed and replaced guard. Make sure to look how the spring is connected, before you remove it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Guard broken on saw
cecil - December 10, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Removed the broken guard and spring
Screwed the new lever on the guard
Then reinstalled the guard
Hooked one end of the spring to the guard, the other end to the housing
Screwed the new lever on the guard
Then reinstalled the guard
Hooked one end of the spring to the guard, the other end to the housing
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ring on piston wore/ regulator wasn't working/safety cover on saw broke/lever broke/cord cut
William - September 11, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Compressor
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench, Torx set
1. Disassembled compressor
2. Removed cylinder head
3. Removed piston and cylinder
4. Install new piston and cylinder
5. Reinstall head
6. Reassemble compressor
7. Test run/ works fine
1. Disassemble saw
2. Remove damaged cover
3. Install new cover
4. Reassemble saw
5. Test run/ works fine
2. Removed cylinder head
3. Removed piston and cylinder
4. Install new piston and cylinder
5. Reinstall head
6. Reassemble compressor
7. Test run/ works fine
1. Disassemble saw
2. Remove damaged cover
3. Install new cover
4. Reassemble saw
5. Test run/ works fine
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broke saw guard.
Dale - September 6, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Took old saw guard off and replaced with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cracked blade housing
Gregory - March 31, 2016
👍 2 of 3 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Snap ring pliers
Parts Used
Remove blade guard , with removal of snap ring. Unscrew blade housing , and remove. Install new,
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Saw fell over and blade guard retract post broke off.
Richard - July 14, 2021
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Need external snap ring pliers...
Parts Used
Be sure its unplugged. Remove the blade next using snap ring pliers remove the snap ring and detach the return spring. Lift broken cover straight up and off the saw. Transfer the plastic knob held with Phillip screw onto the new guard.....then place on saw..connect the return spring. Replace the snap ring and blade .be sure to install blade the right way. Rick
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken blade guard
Ron - January 27, 2021
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Allen wrench
Parts Used
Remove blade, remove washer, remove o-ring, pull off broken guard, install replacement guard , install ring, washer, blade & install & tighten nut.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Safety cover cracked
Wayne - September 2, 2020
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Ring remover pliers
Removed blade
Removed rubber sleeve via screw
Removed retainer ring
Disconnect spring and remove safety cover
Replace new safety cover and attach spring
Install retainer ring
Replace new rubber sleeve with screw
Reinstall blade
Removed rubber sleeve via screw
Removed retainer ring
Disconnect spring and remove safety cover
Replace new safety cover and attach spring
Install retainer ring
Replace new rubber sleeve with screw
Reinstall blade
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade guard broken on Makita circular saw
Richard - July 31, 2018
Tool Type
Circular Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Adjustable Wrench
1 Removed blade
2 Removed ring and cover
3 Installed new cover springs and retaining ring
4 Install blade
2 Removed ring and cover
3 Installed new cover springs and retaining ring
4 Install blade
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
