This OEM sourced replacement part is designed for use with Ryobi chainsaw. It fits over the bar and it is what cuts the material. Over time the chain will stretch and become dull so it will need to be replaced. It is made out of metal and it is sold individually.
To replace this chain you would need a wrench set and a screwdriver.
• Remove the guide bar side panel
• Release the chain tension
• Remove the old chain
• Loosen the tension screw
• Thread the new chain onto the saw
• Align the guide bar
• Replace the side plate
• Tighten the chain to the correct tension
• Finish tightening the side plate nuts
Chainsaw Chain (14-inch) 681858001
OEM part for: Ryobi
Part Number: 681858001
Jump To:
Product Description ?
- 14-Iniches
- Classification: Part
- Weight: 0.32 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This item works with the following types of products:
- Chain Saw Parts
- Saw Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Chainsaw Chain (14-inch)
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Old chainsaw blade was old and dull
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Dull chain due to use
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Cutting slowly and not cutting straight.
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Multitool supplied with saw
Parts Used
loosen chain tension a lot (old chain has stretched).
Straighten out new chain, make sure direction matches old chain (turn over if not).
Remove old chain.
While it's open, clean out sawdust packed into sprocket area.
Put new chain onto bar, getting all the guide nibs into groove in bar.
Put bar back onto bolts, hook chain over sprocket, pull bar to take out most of slack in chain.
Turn tension screw in or out as needed to get adjustment hole in bar to fit onto the adjustment peg.
Hold bar in place, replace cover and nuts. Hand tighten nuts, then adjust chain tension and then fully tighten nuts.
Note that new chain will stretch some in initial use, so recheck tension frequently during the first hour of use.
Needed new blade
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Parts Used
The bar is thin and bent
Tool Type
Chain Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Wrench Set
Neighbor burned up my guide bar & chain on my chain saw
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
Chain became dull & overheated
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Parts Used
Removed the sprocket cover
Remove the chain from the bar and sprocket
Install the new chain on the sprocket and bar
Install the sprocket cover
Adjust the tension on the bar and chain
Chain saw --chain damaged beyond repair.
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
, special chain adjustment tool--(came with saw).
Parts Used
Installed and tightened new chain
Blade was dull
Tool Type
Chain Saw
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
Parts Used
replaced chain
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.