This is an original Ryobi replacement part manufactured for use with 40v cordless chainsaws. The quality metal bar is 14", and has a groove that the drive links on the chain follow around the bar. The tool needed to replace the bar should just be the wrench/screwdriver included with the saw, please note the bar is sold individually.
Bar W/graphics 14 In. 306885001
OEM part for: Ryobi
Part Number: 306885001
Jump To:
Frequently Purchased Together ?
Compatibility
This item works with the following types of products:
- Chain Saw Parts
- Saw Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Bar W/graphics 14 In.
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Chain bar bent
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
Parts Used
2 Remove cover, chain bar and chain.
3 Clean area around sprocket.
4 Loosen chain tensioner a several turns.
5 Insert replacement chain bar making sure to align peg on tensioner with hole in chain bar.
6 Hold bar in place while placing chain back in place on sprocket and around chain bar. Make sure chain is replaced in correct direction.
7 Replace cover and 2 cover nuts hand tight.
8 Adjust tensioner with tensioner screw using screwdriver to take up slack in chain.
9 Tighten both nuts with 1/2 inch socket.
10 Start chainsaw and slowly engage chain to check that chain is fully seated on chain and sprocket with no excessive slack on chain.
11 Readjust chain tension as necessary.
Ignorance, plain and simple. Thought I put the saw in the trailer when I went back for an additional battery. When I drove around the trailed on my 4X4 I drove over the bar.
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set, Vice to straighten one small bend in a link.
Parts Used
Removed the bent bar. Removed the chain.
Replaced the chain on the new bar oiled it and adjusted the tension screw.
One small bend in the chain was straightened.
Added bar and chain to saw.
Loosely added locking nuts.
Adjusted tension screw.
Tightened locking nuts.
Works like a champ.
Bar was the perfect replacement part, thanks - best price on the net, as well
The bar is thin and bent
Tool Type
Chain Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Wrench Set
Neighbor burned up my guide bar & chain on my chain saw
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
The bar broke
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.