Easy
15-30 minutes
This is a Genuine OEM replacement part designed to work with a variety of Engines. This part is made out of Rubber and it is Sold Individually. If the carburetor is leaking fuel it is recommended to replace the Bowl Gasket. Gaskets and O-rings are a common source of problems. They eventually shrink, causing fuel and air leaks that lead to poor engine performance.
Carburetor Bowl Gasket 49-841
OEM part for: Oregon, Husqvarna, Toro, Snapper
Part Number: 49-841
$4.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This Carburetor Bowl Gasket will fit the following 879 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Husqvarna
Toro
Snapper
Show More Compatible ModelsThis item works with the following types of products:
- Engine Parts
- Snowblower Parts
- Lawn Mower Parts
- Lawn Tractor Parts
This part replaces obsolete part #: 631028A, 631028
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
7
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Repair gasket was much better than the original gasket Thanks so much
Repair gasket was great
Guest -
March 24, 2021
Verified Purchase
worked great.
Had my mower up and running in about 5 minutes with this simple gasket
Guest -
July 24, 2020
Verified Purchase
Right part
This was the right part that i needed and fit my machine! Thank you
Guest -
May 15, 2020
Verified Purchase
Exactly what I needed!
Received the parts on time and they were exactly what I needed. Ordering was easy too! I will use them again.
Guest -
April 22, 2020
Verified Purchase
Worked perfect.
Just a gasket but worked perfect. Price seemed a bit exorbitant. Service was great.
Guest -
November 11, 2019
Verified Purchase
replacement part
the parts I ordered fit great and my lawnmower runs well.
Martin -
September 30, 2019
Verified Purchase
everything was fine .thank you
good service easy to do
Guest -
June 21, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Bowl Gasket
What is the diamter of the oring?
Jae
for model number Toro 38185
asked on 2023-11-26
Hello Jae, Thank you for your inquiry. We show this gasket as approximately 2 inches in diameter. We hope this helps.
eReplacementParts Team November 26, 2023
What is the diameter of the oring?
Jae
for model number Toro 47P
asked on 2023-11-26
Hello Jae, Thank you for your inquiry. We show this gasket as approximately 2 inches in diameter. We hope this helps.
eReplacementParts Team November 26, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Leaking gas
Tim - September 19, 2016
👍 4 of 4 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Socket set
Replaced bowl and gasket, mower works fine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lawn mower was leaking gas from the carburetor bowl
Dwight - October 4, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set, Fingers, bench, light
Parts Used
First try: Tried to set the gasket in the bowl lip and reattach the bowl. Wrong.
Second try: Slightly stretch the gasket and put in place on the lip of the carburetor where the bowl attaches; then reattach the bowl. Tighten the bowl. Ooops. Too much tightening, seemed to prevent the float from dropping down far enough to let in more fuel. So loosened the bowl slightly, watching the compression on the gasket. Success!
Now that the engine runs healthy, I can invest in a new blade and some other touches.
By the way, I ordered a gasket and received a package of 8. Anybody else want a gasket?
(Side note: Initially I tried to use an O-ring from the auto store as a gasket. Fit in the bowl lip, but seemed too fat for the float; did not try fitting it on the lip of the carburetor because I was not yet that smart.)
Second try: Slightly stretch the gasket and put in place on the lip of the carburetor where the bowl attaches; then reattach the bowl. Tighten the bowl. Ooops. Too much tightening, seemed to prevent the float from dropping down far enough to let in more fuel. So loosened the bowl slightly, watching the compression on the gasket. Success!
Now that the engine runs healthy, I can invest in a new blade and some other touches.
By the way, I ordered a gasket and received a package of 8. Anybody else want a gasket?
(Side note: Initially I tried to use an O-ring from the auto store as a gasket. Fit in the bowl lip, but seemed too fat for the float; did not try fitting it on the lip of the carburetor because I was not yet that smart.)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Running rough
patrick - May 21, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
Remove and replaced air filter . Removed bowl nut at bottom of fuel bowl cleaned out small passages on nut replaced bowl gasket . Removed blade and plastic cover to access old belt and replaced with new one . Success runs and power drives great ! all so sharped blade while I had it out.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel leak and broken pull rope
michael - October 25, 2022
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Installed gasket and installed new rope
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel contaminated carburetor
Daniel - November 24, 2021
Tool Type
Snowblower
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Carb cleaner
I was certain cleaning the old carb parts was all that would be required to get the snowblower to run again. After soaking old parts in carb cleaner and reassembling old parts. The snowblower wouldn’t even try to run. New jet, with new Orings, new needle valve and seat, new bowl nut and gasket were parts installed to finally get the motor to run. I’m uncertain which part was the culprit, but it runs fine now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Snowblower was leaking fuel from the carb bowl.
Thomas - January 16, 2021
Tool Type
Snowblower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Installed new carb bowl gasket, o-ring and bowl nut washer. Still leaks - ordered new carb.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No instructions for for the up grade for the battery relocation.Took a very long time for delivery( allmost 2months). The parts that were of high quality.
William - June 26, 2020
Tool Type
Lawn Mower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, Socket set
Remvove and replace old battery box.Rotate support bracket to fit new box
Relocate battery box
Install new battery
Repl fuel bowl and casket
Repl primer bulb
Primed and started the lawn mower. Runs ( Ok )
Relocate battery box
Install new battery
Repl fuel bowl and casket
Repl primer bulb
Primed and started the lawn mower. Runs ( Ok )
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Transmission not working
Bruce - September 24, 2019
Tool Type
Lawn Mower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, Socket set, Wrench Set, Nutdriver
Replaced drive belt and traction cable
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not start.
Jeffrey - July 31, 2019
Tool Type
Lawn Mower
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Removed the carburetor, dismantled, cleaned and installed new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gasket leaking gas
Mark - February 16, 2019
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set, Allen wrenches
Removed cover around carburetor
Removed bowl and replaced gasket.
Replaced bolt for bowl with new nut washer
Replaced cover and filled with gas.
No leak
Thanks
Removed bowl and replaced gasket.
Replaced bolt for bowl with new nut washer
Replaced cover and filled with gas.
No leak
Thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
