Easy
Less than 15 minutes
The carburetor attaches to the gasket and the carburetor o-ring. This is an original Ryobi part for use in trimmers and brushcutters. Keep in mind this high-quality item is made of metal and plastic and is sold individually. During replacement, it may require a screwdriver and a set of pliers to help install this part correctly. This item may become broken and will need to be replaced.
Carburetor Assembly 307160011
OEM part for: Ryobi
Part Number: 307160011
$33.06
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 9 machines
Ryobi
RY251PH RY251PH 25CC String Trimmer View Diagrams & Manuals
RY254BC RY254BC 25.4CC Brushcutter View Diagrams & Manuals
RY25PHEMC (090333023) 25cc String Trimmers View Diagrams & Manuals
RY25PHEMC (090333036) 25cc String Trimmers View Diagrams & Manuals
RY251PHVNM Ry251phvnm 25cc String Trimmer Mfg. No. 095333107 3-9-21 (Rev:02) View Diagrams & Manuals
RY252CSVNM Ry252csvnm 25cc String Trimmer Mfg. No. 095333108 3-9-21 (Rev:02) View Diagrams & Manuals
RY253SSVNM Ry253ssvnm 25cc String Trimmer Mfg. No. 095333109 3-9-21 (Rev:02) View Diagrams & Manuals
RY25CSEMCVNM Ry25csemcvnm 25cc String Trimmer Mfg. No. 095333111 9-1-20 (Rev:01) View Diagrams & Manuals
RY254BCVNM Ry254bcvnm 25.4cc Brush Cutter Mfg. No. 095333110 4-5-21 (Rev:02) View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Trimmer Parts
This part replaces obsolete part #: 307160011wasmerged, 307160001 (2-13-19 (Rev:02))
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Ryobi carb
Great part , good price , shipped quickly, easy to install .
Guest -
May 31, 2021
Verified Purchase
Right part, right price, on time
I needed a new carburetor assembly for my weed eater and eReplacementParts had the right item at a good price and delivered it on time in the middle of the Coronavirus pandemic, well done! My only criticism would be that while you had the right "exploded parts" view of my particular model weed eater, the PDF was a little hard to read in an enlarged view (the resolution was low) to identify the part/part number.
Guest -
April 28, 2020
Verified Purchase
Super simple!
The part showed up pretty quickly...it took all of 10 minutes to swap out the part. 3 pulls and it started right up. Super simple!!
Guest -
November 20, 2019
Verified Purchase
Easy part replacement
Part worked great. Exact replacement. Only wish it came with gasket
David -
November 7, 2019
Verified Purchase
great company and courteous personnel
all items ordered were exact and installed well
Guest -
June 6, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Assembly
Does the carb Pt# 307160001 come with an air cleaner? Mine was lost. If not, is there a separate part # for it? I need both.
Jim
for model number RY252CS
asked on 2022-08-07
Hello Jim, Thank you for your inquiry. We show that the air filter does not come with this part and is available as part# 5687301. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team August 07, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
I dropped the trimmer, and broke the carburetor
Lynne - May 1, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Parts Used
R and R ...removed the broken carburetor and put the new one
On. Easy Peasy ! No special instructions needed!!
On. Easy Peasy ! No special instructions needed!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2-Cycle engine was hard to start and had trouble running
Tom - July 30, 2023
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
1. Removed the old carburetor and Replaced with new
2. There are two screws that hold the carburetor to the manifold, two hoses to the gas tank (which are difficult to confuse as to their placement given their respective lengths), and a simple hook-up to the idle switch. Very simple.
3. I hate small engines but this repair was brutally simple and my trimmer runs now like it's brand new.
2. There are two screws that hold the carburetor to the manifold, two hoses to the gas tank (which are difficult to confuse as to their placement given their respective lengths), and a simple hook-up to the idle switch. Very simple.
3. I hate small engines but this repair was brutally simple and my trimmer runs now like it's brand new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Trimmer would not start.
Lou - May 30, 2023
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed old carburetor
2. Installed new carburetor
2. Installed new carburetor
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel was not getting into the carburetor, even after replacing the fuel filter
Steven - May 12, 2023
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver, T20 or T25
Parts Used
1. Removed the air cleaner cover and air filter sponge.
2. Removed fuel lines to carburetor.
3. Used nut driver and torx tip to remove long machine screws.
4. Carefully removed carburetor from intake, preserving mounting gasket.
5. Unhooked throttle wire from carburetor.
6. Completed earlier steps in reverse order with new carburetor.
7. Pressed primer bulb and fuel started to draw after just a few presses.
8. Followed starting instructions and trimmed runned like a champ.
2. Removed fuel lines to carburetor.
3. Used nut driver and torx tip to remove long machine screws.
4. Carefully removed carburetor from intake, preserving mounting gasket.
5. Unhooked throttle wire from carburetor.
6. Completed earlier steps in reverse order with new carburetor.
7. Pressed primer bulb and fuel started to draw after just a few presses.
8. Followed starting instructions and trimmed runned like a champ.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Weed eater would not start. Would not prime.
Robert - April 30, 2023
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, N/a
Parts Used
Remover old carb , 2 screws, and fuel lines. Installed new, connected fuel lines, primed and started. EASY
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Failed to run without choke fully engaged
o. - November 7, 2022
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
Removed old carburetor installed new filled with fuel and trimmer performed like new. Might add that I had previously ordered a new carburetor from another vendor, replaced with this one and problem solved
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replaced carburetor
Roger - October 15, 2021
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed and replaced carburetor. Also had to order gasket as it did not come with the carburetor. the gasket should be part of the package.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken carburetor
THOMAS - July 25, 2021
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the old and installed the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Trimmer would only idle
Larry - May 4, 2020
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set
removed old carb and fuel tank and installed new ones. I didn't have to change out the fuel tank but the price of the tank was so low I did it anyway.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Torn gasket
Ralph - September 12, 2019
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Easily
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
