eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home
  
Power Tool Parts
  
Makita Parts
  CB155 Carbon Brush Set

Carbon Brush Set CB155

OEM part for: Makita

Part Number: CB155


Install
Videos!
Carbon Brush Set - CB155:Makita 360 View
Carbon Brush Set - CB155:MakitaCarbon Brush Set - CB155:MakitaCarbon Brush Set - CB155:Makita 360 View
In Stock
Order within the next 2 minutes and your part ships today!
Easy 15-30 minutes (6 rated repairs)?
OEM: Original Equipment Manufacturer ?
Makita
Does this d-block d-md-none fit my product?

Product Description ?

Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box.



This brush set will fit the Makita tools listed at the bottom of the page.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 26 machines

Makita

HR5001C Rotary Hammer View Diagrams & Manuals
HR5000 Rotary Hammer View Diagrams & Manuals
5008NB Circular Saw View Diagrams & Manuals
HM1211B Demolition Hammer View Diagrams & Manuals
HR3851 Rotary Hammer View Diagrams & Manuals
HM1202C Demolition Hammer View Diagrams & Manuals
HM1202 Demolition Hammer View Diagrams & Manuals
HM1301 Demolition Hammer View Diagrams & Manuals
HM1242C Demolition Hammer View Diagrams & Manuals
HM1211 Demolition Hammer View Diagrams & Manuals
HR4500C Rotary Hammer View Diagrams & Manuals
2412N 12 In. Portable Cut-Off View Diagrams & Manuals
HM1201 Demolition Hammer View Diagrams & Manuals
2416S (Type 1) Saw View Diagrams & Manuals
5008NBA (Type 2) Saw View Diagrams & Manuals
5008NBA (Type 3) Saw View Diagrams & Manuals
5008NB (Type 2) Saw View Diagrams & Manuals
5008NB (Type 3) Saw View Diagrams & Manuals
5008NB (Type 4) Saw View Diagrams & Manuals
6910 (Type 2) Impact Driver View Diagrams & Manuals
HR5000K (Type 1) Misc View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Rotary Hammer Parts
  • Circular Saw Parts
  • Saw Parts
  • Demolition Hammer Parts

This part replaces obsolete part #: 643155-4, 181048-2

Repair Videos ?

Watch the Repair Video for Carbon Brush Set

Customer Part Reviews ?

4.8
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Easy Fix
    Parts always arrive quickly and as described. Thank you
    Alex - June 7, 2021 Verified Purchase
    right parts
    Awesome service , parts received and installed Thank you
    Guest - July 21, 2020 Verified Purchase
    Rotohammer repair.
    I needed new carbon brushes to get my Rotohammer back up and running. The parts arrived promptly and I was back in action.
    Guest - July 12, 2020 Verified Purchase
    Very good service
    Excelent
    Edgardo - December 5, 2019 Verified Purchase
    repairing old tool
    No model# but found parts that were a perfect fit. Shipping was a little slow.
    Guest - September 1, 2022 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Set


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (6 rated repairs)?

    Missing parts.

    mike - January 15, 2018
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Demolition Hammer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Replaced the missing parts.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn brushes.

    Salvedeo - June 3, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Circular Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the old brushes and put the new ones in. Very simple job done in five minutes.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Drill stopped working while in use

    Frank - February 28, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Electric Drill

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, allen wrenches

    I had to disassemble the entire hammer drill for a good cleaning, lubing and to diagnose the problem. If you know the problem and only have to replace the brushes, it can usually be done by removing the metal cover on the electric motor and accessing the brushes under the black access covers with a flathead screwdriver. One of mine was stuck and did not move freely. It is a good idea to inspect the armature, commutator, windings and bearings to see if there are any reasons for the failure.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    No power, motor sparking, broken motor brush

    Dan - June 9, 2023
    Tool Type

    Demolition Hammer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, allen wrench

    remove bottom motor cover plate.
    unscrew brush cover gromet.
    replace carbon brush.
    screw brush cover gromet back on.
    repeat for other side of motor.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    worn out brushes

    John - September 25, 2020
    Tool Type

    Rotary Hammer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Allen keys

    Remove protective cap.
    Remove brush caps
    Remove old brushes
    Insert new brushes
    Return brush caps
    Return protective cap
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Drill just stopped working

    Joseph - June 21, 2020
    Tool Type

    Rotary Hammer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Wrench Set, Nutdriver

    After doing a continuity test to see where the power was not reaching, I decided that the switch was bad. So I ordered a switch and a new set of brushes just to get the drill as new working as possible. Success was the outcome and I am back to coreing masonary holes.
    Thank you ereplacementparts.com
    Jay
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal