Product Information
Description:
This item is an authentic Makita part that has been sourced from the original manufacturer and is intended to be used with demolition hammers. The plastic dust cover is used to house and protect the switch to prevent debris from potentially damaging the switch. This item is available as an individual replacement part. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 16 compatible machines
Products Compatibility
This item works with the following types of products:
- • Demolition Hammer
- • Rotary Hammer
Questions & Answers for Dust Cover
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Demolition Hammer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Switch was broken
Remove and replace
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, allen wrench
trigger switch broken
loosened 3 phillips screws holding 2 halves plastic handle . then remove 4 allen head bolts holding plastic handle to metal body. now remove phillip screws from handle to open 2 halves. remove 4 phillip screws holding wires to switch . best to do one wire at a time to keep from mixing up wire placement on new switch. install dust cover over trigger. reassemble 2 plastic handle halves, making sure not to pinch any wires. 4 allen head bolts attach handle to main body. pull trigger all works as new!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Broken switch
Remove cord and switch cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rotary Hammer
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Allen
Noise and leak
Noise and leak
No impact hard
No impact hard
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rotary Hammer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Dust cover broke
Open it up and replace the cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!