Easy
Less than 15 minutes
This is a genuine part which is supplied by the original manufacturer for use with Delta and Biesemeyer saws. It is an identical replacement for a damaged or a missing cam foot assembly that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct repair procedure. Keep in mind it is sold as an individual item. A wrench set might be needed to replace this cam foot assembly.
Cam Foot Assy A26493S
OEM part for: Delta, Biesemeyer
Part Number: A26493S
$29.06
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 5 machines
Delta
36-L336 Type 1 3HP 1 PH LT UNISAW View Diagrams & Manuals
36-L352 Type 1 3HP LT UNISAW BIES View Diagrams & Manuals
36-L552 Type 1 5HP LT Unisaw Bies View Diagrams & Manuals
36-L552LVC Type 1 Unisaw 5 HP 3PH LT Low Vol View Diagrams & Manuals
Biesemeyer
78-919B (Type 1) Black BIES Fence Body View Diagrams & Manuals
This item works with the following types of products:
- Saw Parts
This part replaces obsolete part #: A26493
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Cam foot assembly for Beismeyer table saw fence.
Worked perfectly as advertised. Easy to install within minutes. Would recommend. Fast shipping too! Thanks
Guest -
August 9, 2023
Verified Purchase
Great part
Who would have thought that a simple replacement part for my saw fence would make such a huge difference! Perfect cuts every time! So happy!
Guest -
June 22, 2023
Verified Purchase
Right part easy repair
Guest -
December 28, 2022
Verified Purchase
PYTSports.net
Called in our order for a part for our table saw guide. It shipped same day. Great service, easy process. Bookmarked you for future parts needs
Guest -
August 16, 2022
Verified Purchase
just what i needed
part was as specified and worked great
Guest -
April 16, 2021
Verified Purchase
Super quick replacement.... easy to order and easy to replace
Part was exactly what I needed. Specs were right on !
Guest -
October 25, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cam Foot Assy
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Fence would move during use
Charles - August 28, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Replaced old cam foot assembly. Perfect fit!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nylon pad had fallen off and I could not find it. Used nylon washers in the mean time.
Alan - March 2, 2024
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Removed old cam and replaced it with new one. Very simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1/16” wider than the original Biesemeyer cam foot
Edward - January 31, 2023
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set, Small crate hammer with pry bar handle
Parts Used
The original part was 1/16” narrower than the new cam foot. My first attempt to place it chipped two small places on the face of the friction plate. This gripes my intelligence on replacing this important part. For my Biesemeyer fence system!
I used a small pry bar to pressure the opening to place the Cam Foot and allow proper alignment of the replacement part.
I used a small pry bar to pressure the opening to place the Cam Foot and allow proper alignment of the replacement part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
nothing, just like originan (except not worn)
Robert - April 11, 2020
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
removed the old one, replace with the new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Original Cam foot Assembly wore out
Eric - February 7, 2020
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Very easy repair. Removed the upper nut and bolt holding original cam foot assembly in place on my Biesemeyer fence. Then re-inserted bolt through new cam foot assembly and tightened down nut. Done! Only needed two 7/16" wrenches.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bismayer fence would no longer lock .
Carl - November 9, 2019
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
1 remove screw
2 replace cam plate
3 re-attach screw
4 realize that that did not make any difference..apparently they did a small change in material thickness as the new cam plate was as thin as the old one without its pressure plate.
2 replace cam plate
3 re-attach screw
4 realize that that did not make any difference..apparently they did a small change in material thickness as the new cam plate was as thin as the old one without its pressure plate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old CAM wore out aftere about 20 years
Stephen - February 20, 2019
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Removed one bolt that holds the CAM in place and removed old CAM and installed new. Piece of cake!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn cam foot would not lock fence.
Kenneth - December 18, 2018
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Replaced cam foot .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
