This is an authentic OEM supplied replacement burner set. It is designed for use with Napoleon grills. This assembly contains three evenly spaced burners which create an even cooking area. It includes stainless steel left, right and center burners. Please note electrodes are sold separately.
To complete this repair no tools are needed.
• Make sure to disconnect the gas tank
• Disconnect electrodes
• Remove old burners
• Secure the new burner assembly
• Re-connect electrodes and gas to test the grill
Burner Set, S Tn Stl Main 450c N010-0671
OEM part for: Napoleon
Part Number: N010-0671
Product Description ?
- Classification: Part
- Weight: 3.43 lbs.
- Shipping: Ships Worldwide
Compatibility
This Burner Set, S Tn Stl Main 450c will fit the following 2 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Napoleon
This item works with the following types of products:
This part replaces obsolete part #: N100-0009, N100-0010
Repair Videos ?
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Burner Set, S Tn Stl Main 450c
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
igniter not working - irregular flame
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Nutdriver
2) remove sear plates
3) using 1/4" socket or nut driver remove 2 screws at rear of burner midway between right and left burners
4) lift up old burner at rear and slide out
5) reverse process to reinstall
If installing a new igniter:
1) remove old igniter gripping the outside and turning counter clockwise, remove hex nut and slide out from under the grill. pull wires from old to install on new, reverse process to install.
If installing new main burner electrode:
1) with igniter out bend back electrode shield and remove 1/4 inch screw, unplug wire from igniter, remove old electrode and reverse process to reinstall.
***I recommend doing all together and it is wise to inspect the drip pan prior to ordering!! It slides out from under the grill with the doors open and is very likely to be rusted. Get all your parts at once and do the whole job in under an hour! Like a new grill!!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.