Easy
Less than 15 minutes
This is a genuine OEM approved part that is specially made for Bissell upright vacuums. It is an identical replacement for a missing or faulty brush roll that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. The rotating brush helps to pick up the material from the carpet, unfortunately over time it may wear or get damaged eventually requiring a replacement. Keep in mind this high-quality item is made of durable materials and is sold individually.
Brush Roll B-203-8072
OEM part for: Bissell
Part Number: B-203-8072
$30.78
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 1 machine
Bissell
12B1 (1240) Powerforce Helix Bagless Upright View Diagrams & Manuals
This item works with the following types of products:
- Vacuum Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Brush Roll
Wide brush roll 13 inches
Richard
for model number 6594
asked on 2023-11-03
Hi Richard,
Thank you for your question. The part number for the brush roll is B-203-2448. We hope this helps!
eReplacementParts Team November 03, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Had to replace the roller
Mary - February 23, 2016
👍 7 of 7 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove the screws from the brush base, then remove the belt from the motor shaft, then pull out old brush roll. Put the belt around the brush roll, press the brush roll in place , then stretch the belt over the motor shaft. Then install the brush base.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Roller brush all bound up with hair and dust
Douglas - March 17, 2019
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Pulled cover off head, remove and replace roller brush, reinstall belt, Replace cover nd start machine
Did you find this story helpful?
Thanks for voting and helping fellow customers!
bad vaccuum roller
john - January 22, 2019
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
removed the base plate that held the roller in place
removed the belt
replaced the roller
put back belt and base plate
finished the cleaning!
removed the belt
replaced the roller
put back belt and base plate
finished the cleaning!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The brush roller was worn down and the lever release was broken, the handle would not stay upright.
Wayne - March 1, 2018
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1. Remove the screws from the bracket of the vacuum surrounding the brush roller.
2. Remove the belt from around old roller and the roller comes right out.
3. Replace the belt around the new roller and it snaps right into place.
4. Replace the screws back in the bracket holding the roller unit.
1. Remove two screws holding case surrounding the lever release.
2. Remove the lever release by prying out with small screwdriver, a little pressure is required and another set of hands to help. One set of hands with small screwdriver to slightly spread the case holding the lever and the other set of hands to pop the lever out. A little pressure is necessary.
3. Snap new lever in place.
4. Replace the cover and the screws.
2. Remove the belt from around old roller and the roller comes right out.
3. Replace the belt around the new roller and it snaps right into place.
4. Replace the screws back in the bracket holding the roller unit.
1. Remove two screws holding case surrounding the lever release.
2. Remove the lever release by prying out with small screwdriver, a little pressure is required and another set of hands to help. One set of hands with small screwdriver to slightly spread the case holding the lever and the other set of hands to pop the lever out. A little pressure is necessary.
3. Snap new lever in place.
4. Replace the cover and the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Key burning belts, wouldn't suck properly, handle wouldn't stay in the up position.
Manny - February 15, 2017
Tool Type
Vacuum
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Removed handle securing screws in order to replace broken lever release, re assembled screws to hold up handle.
Remove base plate and r&r brush roller and new belt with new base cover.
R & R filter with new one
Vacuum works like new
Remove base plate and r&r brush roller and new belt with new base cover.
R & R filter with new one
Vacuum works like new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
