eReplacementParts.com
877-346-4814
Milwaukee Parts
Repair Parts Home
  
Power Tool Parts
  
Milwaukee Parts
  22-18-0075 Brush Assembly

Brush Assembly 22-18-0075

OEM part for: Milwaukee

Part Number: 22-18-0075


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 10 hours and your part ships today!
Easy 15-30 minutes (9 rated repairs)?
OEM: Original Equipment Manufacturer ?
Milwaukee
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Milwaukee replacement part.
Includes 1 Carbon Brush with wire lead, brush spring and bracket attached.
Two brushes are needed for the tools shown below.

• Worn brushes are often the cause behind a a poorly running motor.
• Replacing brushes can fix an intermittently operating motor.
• New brushes can restore a motor’s electric braking.


Carbon motor brushes are one of the most commonly replaced power tool parts. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes be sure to also inspect your armature for burns, cracks, or other damage which are indication of a larger motor problem.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Also Known As: Carbon Brush, Motor Brush
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 9 machines

Milwaukee

5625-29 (SER 395A) 3.5 HP Router View Diagrams & Manuals
5625-20 (SER 395A) Router View Diagrams & Manuals
5626-69 (SER A72A) Router View Diagrams & Manuals
6380-55 (SER A36A) Circular Saw View Diagrams & Manuals
6390-20 (SER 983A) 7-1/4" Circular Saw with Tilt-Lok Handle View Diagrams & Manuals
6390-20 (SER 983B) 7-1/4" Circular Saw with Tilt-Lok Handle View Diagrams & Manuals
6390-20 (SER 983C) 7-1/4" Circular Saw with Tilt-Lok Handle View Diagrams & Manuals
6391-21 (SER 189A) Left Blade 7-1/4" Circular Saw with Tilt-Lok Handle View Diagrams & Manuals
6486-20 (SER 401A) METCO PANEL SAW MOTOR 110V View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Router Parts
  • Circular Saw Parts
  • Saw Parts
  • Engine Parts

Customer Part Reviews ?

5
Average Rating (out of 5):
8 Reviews
Click to filter by ratings:
5 stars
8
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Fit my Router
    Perfect fit for my 5625-20, parts at way less than other sellers and work well.
    Donald - July 8, 2023 Verified Purchase
    Service was great
    Parts fit perfectly, saw runs great
    Guest - June 21, 2022 Verified Purchase
    Part worked as expected. Easy to find part on website.
    My saw is back in working order, nice to have a website for repairing tools.
    Anthony - May 31, 2020 Verified Purchase
    Low cost easy repair
    The brushes arrived quickly, and fit perfectly. The saw purrs like a kitten again!
    Guest - May 9, 2020 Verified Purchase
    Exactly what I needed
    It was a perfect replacement
    Guest - November 2, 2019 Verified Purchase
    worked as expected,
    Fit perfectly
    Guest - October 12, 2019 Verified Purchase
    Exact parnumber as the original
    I purchased four of this carbon brushes for my Milwaukee 5625-20 Router. Two as extras and the other two to replace my used up carbon brushes. To my surprise, on my original carbon brushes have the markings L42F12 and the purchased sets have the identical markings. That gave me the confidence that this company eReplacementParts is as genuine as they come. I have full confidence knowing that when I buy a part from them it will be genuine. Changing out the Brushes was a breeze, give or take under 10 minutes to open up the tool take out the old brushes, replace with new ones and assemble the tool and back on my router table ready for action.
    Guest - October 1, 2019 Verified Purchase
    Worked as expected
    Perfect fit fast shipping
    Guest - August 3, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Brush Assembly


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (9 rated repairs)?

    Brushes and tubes worn

    Tim - November 10, 2016
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Circular Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove two torx screws on back of motor housing. Depth cut adjustment screw must also be removed to open housing. Slide out old tubes / brushes and slide in the new. Replace housing and depth adj and that was it
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    No power and lots of sparks at the motor.

    Joe - March 19, 2018
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Circular Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    , Star drivers

    Removed motor housing (3 star screws) replaced bad brush (s) one of the brushes had failed due to the connecting wire coming loose. Now its back to normal and working great. $5 bucks and 25 minutes to repair vs $135.00 to replace
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Did not run

    Aaron - April 21, 2016
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Circular Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Nutdriver

    Removed motor cover and handle, unhooked black and white wire to motor, removed clips holding motor brushes in place, slide new brushes into place. Removed handle with power switch and plug. Removed switch and plug reattaching new power cord, then reattach electrical wires to to motor to new switch. Slide the switch into handle nesting wires for electrical plug into handle. Reassemble handle then slide back into motor. Attach black and white wires to motor. Replace motor cover. Pretty straight forward.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    brushes were wore out

    Larry - January 14, 2022
    Tool Type

    Router

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, torx wrenches

    replaced the brushes
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Router would not start

    Randy - August 15, 2020
    Tool Type

    Router

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Removed the top cover and depth adjustment knob with a torx driver. The two brush tube assemblies were removed with the same torx and I replaced the brushes. I also replaced the on/off switch just for good measure - it only cost a few dollars more...and why not while I had the cover off? When I put it back together, the router fired right up.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Grip Back was Missing

    Lowell - January 26, 2020
    Tool Type

    Circular Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers

    Since the back was missing, it seemed like a perfect time to asses other damages to my Milwaukee circular saw.
    The cord was missing the plug and damaged in other areas so I replaced it.
    The bevel adjustment bracket was bent so I needed to take the saw completely apart to be able to straighten out the bracket in a vise.
    Since the saw was completely apart, it was a great time to clean out all the caked in sawdust and grime. That's when I figured it would be the right time to replace the brushes.
    The hardest part was removing the snap clip to take off the saw guard itself.
    Reverse the procedure and presto! The saw runs like new!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Saw would not run.

    Joey - November 21, 2019
    Tool Type

    Circular Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Socket set

    1-Took saw off of panel saw frame.
    2-Took off old switch and replaced.
    3 -Took old brushes and brush tube assemblies out and replaced.
    4 - Put saw back together and mounted to frame.
    5 - Powered up and cut it on and it ran fine.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The brush was burnt out.

    willie - March 17, 2018
    Tool Type

    Circular Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Allen wrench

    Replaced with the new. Easy!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes worn out and contaminants

    Kyle - November 24, 2017
    Tool Type

    Router

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    , Torx

    Took head apart and replaced brushes
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal