eReplacementParts.com
866-322-9842
Milwaukee Parts
Repair Parts Home  Power Tool Parts  Milwaukee Parts  22-18-0075 Brush Assembly

Brush Assembly

Part Number: 22-18-0075
Milwaukee
Availability: 25+ in stock
Price: $3.99
Quantity:
Order within the next 7 hours
and your part ships today!
Product Information
Manufacturer: Milwaukee
Product Number: 22-18-0075
Classification: Part
Weight: 0.01 lbs.
Also Known As: Carbon Brush, Motor Brush
Shipping: Ships Worldwide
Description:
Genuine Milwaukee replacement part.
Includes 1 Carbon Brush with wire lead, brush spring and bracket attached.
Two brushes are needed for the tools shown below.

• Worn brushes are often the cause behind a a poorly running motor.
• Replacing brushes can fix an intermittently operating motor.
• New brushes can restore a motor’s electric braking.


Carbon motor brushes are one of the most commonly replaced power tool parts. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes be sure to also inspect your armature for burns, cracks, or other damage which are indication of a larger motor problem.
Products Compatibility

This item works with the following types of products:

  • • Circular Saw
  • • Engine
  • • Router
  • • Saw
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
4 of 4 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Brush Assembly - 22-18-0075
Brush Tube Assembly - 22-22-1030
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes and tubes worn
Remove two torx screws on back of motor housing. Depth cut adjustment screw must also be removed to open housing. Slide out old tubes / brushes and slide in the new. Replace housing and depth adj and that was it
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Brush Assembly - 22-18-0075
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Star drivers
No power and lots of sparks at the motor.
Removed motor housing (3 star screws) replaced bad brush (s) one of the brushes had failed due to the connecting wire coming loose. Now its back to normal and working great. $5 bucks and 25 minutes to repair vs $135.00 to replace
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Switch - 23-66-2115
Brush Assembly - 22-18-0075
Cord Set Assembly - 22-64-0100
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
Did not run
Removed motor cover and handle, unhooked black and white wire to motor, removed clips holding motor brushes in place, slide new brushes into place. Removed handle with power switch and plug. Removed switch and plug reattaching new power cord, then reattach electrical wires to to motor to new switch. Slide the switch into handle nesting wires for electrical plug into handle. Reassemble handle then slide back into motor. Attach black and white wires to motor. Replace motor cover. Pretty straight forward.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Brush Assembly - 22-18-0075
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
The brush was burnt out.
Replaced with the new. Easy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Brush Assembly - 22-18-0075
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
, Torx
Brushes worn out and contaminants
Took head apart and replaced brushes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • worked as expected,
    Fit perfectly
    Guest - 4 days ago Verified Purchase
    Exact parnumber as the original
    I purchased four of this carbon brushes for my Milwaukee 5625-20 Router. Two as extras and the other two to replace my used up carbon brushes. To my surprise, on my original carbon brushes have the markings L42F12 and the purchased sets have the identical markings. That gave me the confidence that this company eReplacementParts is as genuine as they come. I have full confidence knowing that when I buy a part from them it will be genuine. Changing out the Brushes was a breeze, give or take under 10 minutes to open up the tool take out the old brushes, replace with new ones and assemble the tool and back on my router table ready for action.
    Guest - 15 days ago Verified Purchase
    Worked as expected
    Perfect fit fast shipping
    Guest - August 3, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Milwaukee
    Product Number: 22-18-0075
    Classification: Part
    Weight: 0.01 lbs.
    Also Known As: Carbon Brush, Motor Brush
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy