Brush And Holder Assembly With 316046890
*This part replaces obsolete part #: 316051990, 316053460, 31604108, 316045980 and 316041080.
|
Genuine Metabo replacement part This Brush is sold individually, 2 are needed for the tools shown below It includes the Brush Holder and Brush Spring. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems. |
This part is compatible with the following machines:
W8-115Quick (00264420) 800W Angle Grinder
W8-125 (00263420) 850W Angle Grinder
W8-125Quick (00266420) 800W Angle Grinder
W11-125Quick (00270420) 1100W Angle Grinder
WE9-125Quick (00269420) 950W Angle Grinder
WE14-125Plus (00281420) 1400W Angle Grinder
WE14-150Plus (00286420) 1400W Angle Grinder
WE14-150Quick (00160420) 1400W Angle Grinder
W11-150 (600271000) Small Angle Grinder
W11-150 (600271310) Small Angle Grinder
W11-150 (600271420) Small Angle Grinder
WEP 14-150 QuickProtect (600290420) 1400 Watt Angle Grinder
WE14-125VS (00292420) Electric Variable Speed Grinder
WE 14-150 Quick (00160421) 1400W Angle Grinder
GE 710 Plus 6.4 Amp Die Grinder
WEPBA 14-150 QuickProtect (00322420) Angle Grinder
GE 950 G Plus (00618420) Straight Grinder
WEF 9-125 (13060420) Small Angle Grinder
WEF 9-125 (21023420) Small Angle Grinder
RS 14-125 (603824750) 120V Renovation Grinder
GEP710 PLUS (600617420) Die Grinder
This item works with the following types of products:
- • Grinder
Questions & Answers for Brush And Holder Assembly With
2. Unhooked the wires
3. Pulled out the old brush holders and brushes
4. Shined up the armature with emery tape
5. Put it back together
2. Replace both brushes
3. Replace power cord
Job complete.
2. Removed old brush holders.
3. Installed new brush holders
4. Reassembled case
Works like new.
- 1
- 1