Watch The
Repair Video
Repair Video
Product Information
| Manufacturer: Oster Pro |
| Product Number: 42573000000 |
| Classification: Part |
| Weight: 0.01 lbs. |
| Shipping: Ships Worldwide |
Description:
| This is available as an individual replacement part. The bale is made out of metal. A screwdriver and a set of pliers might be necessary during the installation of this part. It may become broken and will need to be replaced. This is an authentic OEM sourced item which is specially produced for use with Oster Pro hair clippers. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Hair Clipper
Questions & Answers
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Hair Clipper
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
2 speed switch broke. Clipper does not run. Lost Bale.
Unplug the clippers
Removed the top Clipper Switch cover.
Took pictures of where the wires were attached.
Unscrewed wires and contacts, then removed the old broken 2-speed switch.
Replaced new 2-speed switch, connected the switch wires and contacts by referring to the photos.
Confirmed that 2-speed switch was in neutral and pushed the switch to speed 1.
It worked.
Replaced the bale. Beyond easy.
Removed the top Clipper Switch cover.
Took pictures of where the wires were attached.
Unscrewed wires and contacts, then removed the old broken 2-speed switch.
Replaced new 2-speed switch, connected the switch wires and contacts by referring to the photos.
Confirmed that 2-speed switch was in neutral and pushed the switch to speed 1.
It worked.
Replaced the bale. Beyond easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, needlenose pliers
Not powering up and clatter noise
Take top cover off by removing 2 screws, remove lever, clean out old grease, re-grease, install washer and lever, replace cover, remove brushes one at a time, replace, apply AC, and starts every time. Have less clatter then before therefore I may need another internal part, will investigate at a later time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
| Manufacturer: Oster Pro |
| Product Number: 42573000000 |
| Classification: Part |
| Weight: 0.01 lbs. |
| Shipping: Ships Worldwide |
