866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Bail Arm Guide

Part Number: 1200851
PfluegerShakespeare
Availability: 6 in stock
Price: $2.99
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: 1145733 and 1145730.

Product Information
Manufacturer: Pflueger, Shakespeare
Product Number: 1200851
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
Compatibility

This part is compatible with the following machines:

Shakespeare
Pflueger

Products Compatibility

This item works with the following types of products:

  • • Reel
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
5 of 6 people found this instruction helpful
Tool Type:
Reel
Parts Used:
Bail Arm Guide - 1200851
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, monofilament line
A small plastic part within the spring mechanism was broken
Disassembled the bail guide to expose the broken part
Removed the broken part
Unpackaged the new part
Tied monofilament to the spring and taped the mono to the table. Why you ask? To put the bail back together you have to compress the spring. They ALWAYS shoot across the room and can get lost.
Snipped the mono and reassembled everything and tightened the phillips screws
The reel was fixed for a small cost and will serve me for many years
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Reel
Parts Used:
Bail Arm Guide - 1200851
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bail arm guide was missing.
Used #1 phillips screwdriver to remove the rotor cover. Used the same screwdriver to gently pry out the bail spring. Loosen the bail arm screw one to two turns, just enough to allow the new bail arm guide to slip into the hole in the bail arm. Once I was sure the new arm guide was in the hole, I slipped the spring onto the guide and compressed it enough to fit it back into its groove in rotor assembly. Without moving anything which might put pressure on the exposed parts, put the rotor cover back into place and screw it down tight. (Note: If there is no grease on the parts under the rotor cover or it is black or gritty, completely remove the bail arm screw to allow you to clean everything and apply good grease before putting the new arm guide in place.)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Reel
Parts Used:
Bail Arm Guide - 1200851
Bail Spring - 1200850
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Light grease
Bail would not trip when handle was turned
1. Removed screw and plate on side of reel where line runs under bail
2. Removed main bail screw on same side
3. Removed broken guide and bail spring
4. Placed new guide and spring in place on back of bail added light grease
5. Reattached large bail screw
6. Pushed bail spring into slot and added light grease
7. Reattached side plate
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Reel
Parts Used:
Bail Arm Guide - 1200851
Bail Holder Sub-Assy - 1216575
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bail arm was broke
Removed broke one put new one on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 3 people found this instruction helpful
Tool Type:
Reel
Parts Used:
Bail Arm Guide - 1200851
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bail arm guide was broke.
1. Removed screw holding bail arm. Take extra care to not loose the spring that the bail arm sits in. It has a tendency to shoot.
2. Replaced bail arm guide into spring.
3. Replaced bail arm.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Reel
Parts Used:
Bail Arm Guide - 1200851
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bail pin broken
Removed bail screw replaced bail pin
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Reel
Parts Used:
Bail Arm Guide - 1200851
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Bail arm guide was missing
Studied several schematics and diagrams on line to determine what parts were missing and where they went. From that I was able to figure out the orientation of the bail arm guide.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Reel
Parts Used:
Bail Arm Guide - 1200851
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bail arm guide broken for years
Slipped it in. Aligned parts and holes. Put the screws back.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Reel
Parts Used:
Bail Arm Guide - 1200851
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Plastic retainer that holds return spring broke
Inserted new spring retainer, greased it well and replaced cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Reel
Parts Used:
Bail Arm Guide - 1200851
Bail Spring - 1200850
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bail spring and arm broken
Remove access cover remove old parts replace with new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Bail Arm Guide - ( 1200851 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Bail Arm Guid Installation

1716454

I have looked at the schematics for this part's reel and I don't quite understand how to put the bail arm guide in. Does the tapered end slide into the top of the spring and then the "male end" goes into the bail arm? I am pretty sure my arm guide went flying across the river when I unscrewed the bail arm.
Question: Bail Arm Guide 1200851

1524136

What can this be replaced with?
WJA
Hello 1524136,

The Pflueger part number 1200851 Bail Arm Guide. Is available to order at anytime.

-WJA
Reviews
4
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
0
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Fast and good customer service and Reliable Parts
    Fast and reliable
    Guest - 18 days ago Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy