Easy
15-30 minutes
This is a genuine item that is supplied by the original equipment manufacturer for use with Jet equipment. The purpose of this part is to secure the main spindle. It is an identical replacement for a missing or a damaged tail spindle that was installed on a new unit. Please make sure to refer to the appropriate diagram of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.
Tail Spindle JWL1236-46
OEM part for: Jet
Part Number: JWL1236-46
$62.11
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 1 machine
Jet
708352-JWL-1236 708352jwl-1236 Lathe Parts View Diagrams & Manuals
This item works with the following types of products:
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Tail Spindle
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The tailstock spindle that moves in and out does so via a threaded tailstock screw that cranks. It was stripped.
Roger - May 25, 2016
Tool Type
Lathe
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Small Sledge Hammer, driving tool (steel rod)
Screw the Tail Spindle (large extending part) off of the Tail Stock Screw.
Remove handle from tailstock by loosening a set screw.
The Tail Stock Screw is held in place by the C Ring - which you cannot access. The only way to get it out is to take a large, heavy hammer and, using a driving tool such as a thinner steel rod, drive the Tail Stock Screw out from the back (handle side).
Put the new Tail Stock Screw, with the C Ring in place, in the tailstock from the front side and drive it back in using the hammer and driving tool. It will extend through - and when it "clicks" in place, all you have to do is attach the hand wheel (tighten the set screw) and thread the Spindle onto thte Tail Stock Screw.
Be sure to add dry lubricant before the Spindle goes back into the tailstock - this will keep it smooth and accurate.
Remove handle from tailstock by loosening a set screw.
The Tail Stock Screw is held in place by the C Ring - which you cannot access. The only way to get it out is to take a large, heavy hammer and, using a driving tool such as a thinner steel rod, drive the Tail Stock Screw out from the back (handle side).
Put the new Tail Stock Screw, with the C Ring in place, in the tailstock from the front side and drive it back in using the hammer and driving tool. It will extend through - and when it "clicks" in place, all you have to do is attach the hand wheel (tighten the set screw) and thread the Spindle onto thte Tail Stock Screw.
Be sure to add dry lubricant before the Spindle goes back into the tailstock - this will keep it smooth and accurate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lead screw threads cross threaded needed new lead screw and tail spindle
Richard - March 28, 2016
Tool Type
Lathe
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, allen wrench
Parts Used
Used a allen wrench to remove set screw from the handle,remove handle , then remove tail spindle and lead screw , replace with new tail spindle and lead screw, install handle and install set screw. Very easy. new parts fit perfect. Thanks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leadscrew worn and broken c ring
Derek - March 4, 2016
Tool Type
Lathe
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill
Parts Used
Replaced parts, drilled a small indention in leadscrew for handle set screw to fit in. Replaced parts into the tailstock and problem was solved.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
