Hard
More than 2 hours
This part is available as an individual replacement. The spindle pulley attaches to the shifting lever bracket. When replacing this item a screwdriver and an allen wrench may be needed. It is made of a durable material and will need to be replaced if it becomes broken. This is an authentic Jet replacement part that is sourced from the original manufacturer for use with lathes.
Spindle Pulley Assembly JWL1442-161
OEM part for: Jet
Part Number: JWL1442-161
$107.08
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 2 machines
Jet
JWL-1442VS (2007) Wood Lathe View Diagrams & Manuals
JWL-1442VS (2010) Wood Lathe View Diagrams & Manuals
This item works with the following types of products:
- Lathe Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Spindle Pulley Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Worn out variable speed and new belt. Replaced both halves of the pulley on the motor and on the spindle
Daniel - January 5, 2017
👍 4 of 4 people found this instruction helpful
Tool Type
Lathe
Difficulty
Hard
Time
1-2 hours
Tools Used
Screwdriver, Allen wrenches, tool to remove \\
Parts Used
Remove the hand wheel, remove the lock washer on the outside of the body housing. Inside the housing, remove the clip in front of the outside pulley then loosen the allen screw on the outside pulley half. Protect the end of the spindle with a piece of wood and strike the wood with a forceful blow until the spindle moves toward the front of the housing. Continue driving the spindle backward until the pulleys are free from the spindle. Place the front half of the new pulley onto the spindle, then the new belt and then the new back half of the pulley. You must drive the spindle back toward the hand wheel end of the housing as you do this. Make sure the key and the key ways on the pulleys line up.
Motor pulley change. You mus first compress the outer spring to relieve the pressure so the outer clip may be removed. Be very careful doing this. Once the clip is removed the spring and pulley assembly can be removed and the new pulley assembly slipped on the motor shaft. Good luck, I have now done this three times and it is getting easier.
Motor pulley change. You mus first compress the outer spring to relieve the pressure so the outer clip may be removed. Be very careful doing this. Once the clip is removed the spring and pulley assembly can be removed and the new pulley assembly slipped on the motor shaft. Good luck, I have now done this three times and it is getting easier.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Part of head stock pulley assembly was broken
WILLIAM - August 7, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Lathe
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench, Hammer, drive pin made of maple, c-clamp pliers
Parts Used
Followed instructions on parts page and with the exploded view of the lathe the r&r of the pulley assembly was pretty straight forward. You guys rock!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Got the speed adjuster out of calibration.
Maurice - January 26, 2022
Tool Type
Lathe
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench
Parts Used
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wear from use
Dennis - December 15, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Lathe
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Wrench Set, Adjustable Wrench
Parts Used
You have to remove the shaft in order to replace both pulleys.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
