Repair Parts Home    Power Tool Parts    Campbell Hausfeld Parts    FP209039AV Pump/Motor Assembly

FP209039AV Pump/Motor Assembly

Part Number: FP209039AV
Campbell Hausfeld
Availability: 9 in stock
Price: $48.81
Quantity:
Ships within 1 business day
Repair Stories
4 of 4 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Pump/Motor Assembly - FP209039AV
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
My motor pump would not pump. The piston seals went bad.
Remove cover, carefully disconnect all wiring to insure no damage to the connections. If you have a hard time remembering how the wires go take a picture before disconnecting them. Remove all screws and place them in a safe place. After removing all parts re-install in reverse. Install hose in tank first than place hose clamp on hose and place hose on pump and tighten clamp. Last thing to do is install cover. Test pump to insure hose connection is tight. Installation is complete.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Pump/Motor Assembly - FP209039AV
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Nutdriver
A complete assembly was shipped, it slipped right into place, very easy.
Great replacement assembly fitted right in. Used the original nuts and bolts. Easy to accomplish.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 0 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Check Valve - FP209532AV
Pump/Motor Assembly - FP209039AV
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Wrench Set, Hexhead tip
Worn piston rubber rings
Remove and replace motor assembly. I made a wiring diagram just in case I needed it, but it was replaced very easily, without any problems. After you install it you will have a brand new compressor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 0 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Pump/Motor Assembly - FP209039AV
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, T-Handle metric Allen wrench and open end wrench
Compressor would not pump air
Use the t-handle to remove the four corner bolts, carefully lift of the housing so not to damage the wires for the switch, remove the wires from the switch, them remove the motor assembly and replace the new one. Hook-up the the wires to the switch and replace the housing. You are done..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Pump/Motor Assembly - ( FP209039AV )
You need to be signed in to participate in the discussion.
You need to be signed in to particupate in the discussion.
Ask a question, answer a question, or post a comment!
  • Subject:
  •  
  • Comment:
  •  
bkskid
Question: Compressor

bkskid

Is it worth it to repair or should I just replace the unit?
WJA
Reply: Compressor

WJA

Hello bkskid,

We do ship quite a few of the Campbell Hausfeld FP209039AV Pump/Motor Assembly. Out of here. So there are quite a few people that think it is worth it. You'll basically have a new compressor.

-WJA
Product Information
Manufacturer: Campbell Hausfeld
Category Number: FP209039AV
Classification: Part
Weight: 3.05 lbs.
Shipping: Ships Worldwide world wide shipping icon
Repair Guides
Articles:
How to Replace the Manifold Kit on an Air Compressor
Remove and install the manifold on an air compressor with this step-by-step guide....
November 26, 2014
How to Replace the Safety Valve on an Air Compressor
Remove and install the safety valve on a compressor with these step-by-step instructions....
November 26, 2014
fancyboxy