Easy
15-30 minutes
Pulley-03.00 Od 0.380 1728001SM
OEM part for: Murray, Snapper, Simplicity
Part Number: 1728001SM
$19.91
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Pulley-03.00 Od 0.380 will fit the following 351 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Murray
Snapper
Simplicity
Show More Compatible ModelsThis item works with the following types of products:
- Lawn Tractor Parts
This part replaces obsolete part #: 1728001
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Pulley-03.00 Od 0.380
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
belt idler pulley burn from friction and not turning.
David - September 9, 2023
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
removed the old pulley and installed the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Idler drive pullers wore out and were causing damage to the drive belt
Thayer - July 14, 2022
Tool Type
Lawn Tractor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, Socket set, Wrench Set
On a snapper lawn tractor, remove the mower deck. The drive pillows are visible mounted on the frame under the seat.after you remove the belt using sockets remove the mounting bolt and pulley. Slide off the worn pulley and replace it with the new one. Replace it in reverse order
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Noisy bearing in small pulley
Gregory - July 13, 2022
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Removed the nuts holding both pulleys on. Replaced with new pulleys. Route the drive belt. Make sure the top of the bolts are seated correctly as they are a carriage bolt and must seat in the square hole . Put new belt on the mower deck
Did you find this story helpful?
Thanks for voting and helping fellow customers!
drive belt tension pulley broke
john - October 10, 2019
Tool Type
Lawn Tractor
Difficulty
Medium
Time
15-30 minutes
Tools Used
Socket set
Parts Used
removed nut, installed new pulley, reinstalled nut.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I bought a $2000 Murray (Snapper)
Tom - February 26, 2019
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set
I had to drop the deck for maintenance anyway but you can remove the pulleys without doing that, just a tighter space. I found an idler pulley on the mower deck missing a seal and dry, dirty and rusty so I found a washer, ground it to size, cleaned and greased the bearing and put the washer in with a tappy tap tap (AvE).
Remove nut/s and pulley, install new ones, tighten, finish deck maintenance and reinstall.
One nut was stripped but I got a 14mm socket on tight and got it loose. I thought I'd need vise grip.
If you don't want to fully drop the deck but need extra room, take the drop arms loose and prop them up.
I'm very disappointed in this Snapper LT152 with the Murray frame. I hope these Briggs replacement parts are better.
Remove nut/s and pulley, install new ones, tighten, finish deck maintenance and reinstall.
One nut was stripped but I got a 14mm socket on tight and got it loose. I thought I'd need vise grip.
If you don't want to fully drop the deck but need extra room, take the drop arms loose and prop them up.
I'm very disappointed in this Snapper LT152 with the Murray frame. I hope these Briggs replacement parts are better.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
