eReplacementParts.com
877-346-4815
Shindaiwa Parts
Repair Parts Home
  
Lawn Equipment Parts
  
Shindaiwa Parts
  P050009310 Gasket/diaphragm Kit

Gasket/​diaphragm Kit P050009310

OEM part for: Shindaiwa

Part Number: P050009310


Install
Videos!
Grid squares measure 1x1 inch
$30.31
In Stock
Ships within 1 business day
Medium 30-60 minutes (3 rated repairs)?
OEM: Original Equipment Manufacturer ?
Shindaiwa
Does this d-block d-md-none fit my product?

Product Description ?

It is a genuine replacement kit that is specially manufactured for use with Shindaiwa gas powered lawn and garden equipment. This kit contains five high quality items, it includes the gaskets and diaphragms that are used to create an air tight seal between the carburetor parts. For correct location and use of these items make sure to check your equipments parts diagrams. Over time the material may become brittle and crack eventually requiring replacement.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 18 machines

Shindaiwa

PB270 Power Broom View Diagrams & Manuals
C35 Brushcutter View Diagrams & Manuals
C35LA Brushcutter View Diagrams & Manuals
C270 Brushcutter View Diagrams & Manuals
C-20 Brushcutter View Diagrams & Manuals
LT-20 Trimmer View Diagrams & Manuals
RC-45 Brushcutter View Diagrams & Manuals
C-27 Brushcutter View Diagrams & Manuals
HT20 Hedge Trimmer View Diagrams & Manuals
C35LA (INTL)(20000001-20999999) Brushcutters (C)Intl View Diagrams & Manuals
C35LA (INTL)(6010001-9319999) Brushcutters (C)Intl View Diagrams & Manuals
C35LA (INTL)(T04720001001-T04720999999) Brushcutters (C)Intl View Diagrams & Manuals
C35LA (INTL)(T52120001001-T52120999999) Brushcutters (C)Intl View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Trimmer Parts
  • Hedge Trimmer Parts

This part replaces obsolete part #: 70036-98020, 99909-103, 99909-105

Repair Videos ?

Articles:
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015

Questions & Answers ?

Our customer Service team is at the ready daily to answer your part and product questions.

photo of team member
Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Questions & Answers for Gasket/​diaphragm Kit


No questions have been asked yet

Customer Repair Instructions ?

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Medium 30-60 minutes (3 rated repairs)?

2-stroke carburetor fuel pump getting fat weak

James - July 28, 2017
Tool Type

Hedge Trimmer

Difficulty

Easy

Time

1-2 hours

Tools Used

Screwdriver, Pliers, Needle nose pliers, carb cleaner

Removed and disassembled carburetor, cleaned and inspected, replaced fuel pump gasket, diaphragm
Did you find this story helpful?
Thanks for voting and helping fellow customers!

Gaskets and diaphram were internally leaking

Ricky - July 14, 2016
Tool Type

Hedge Trimmer

Difficulty

Medium

Time

30-60 minutes

Tools Used

Screwdriver, Pliers

I watched your YouTube video on "How to Clean a Two-Cycle/Two-Stroke Engine Carburetor". As I have never worked on a carburetor before it helped me get my trimmer up and working like new. I thought I would copy the link, for anybody else that could use it.

https://www.youtube.com/watch?v=Z18WwhxEtxI

Did you find this story helpful?
Thanks for voting and helping fellow customers!

Carburetor was flooding and cable clip was missing

Arthur - January 17, 2016
👍 0 of 1 people found this instruction helpful
Tool Type

Trimmer

Difficulty

Medium

Time

15-30 minutes

Tools Used

Screwdriver, Pliers

Drain fuel,place on clean towel/rag, use compressed air to clean/dry, use screwdriver to take carburetor off,disconnect fuel lines & throttle cable, remove carburetor parts and replace with new diaphragm kit. Press spring/needle down to remove spring & clip, replace spring clip and tighten cable back on carburetor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal