Easy
15-30 minutes
This is an original MTD, Yard-Man, Troy-Bilt, Bolens and Yard Machines part for use with Snow Blowers. The auger drive cable connects the auger control lever on the control panel to the engagement lever in the auger drive system. The most common reason for replacing the cable is when it is broken, causing the snowblower to not properly pick up snow. This part is sold individually. The tool that you will need to replace auger drive cable is a 3/8” socket.
Clutch Cable 946-04091
OEM part for: Ryobi, MTD, Bolens, Yard Man, Troy-Bilt, Yard Machines, Husky
Part Number: 946-04091
$30.27
In Stock
Order within the next 9 hours and your part ships today! 
Compatibility
This Clutch Cable will fit the following 144 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
MTD
Bolens
Yard Man
Troy-Bilt
Yard Machines
Husky
Ryobi
Show More Compatible ModelsThis item works with the following types of products:
- Snowblower Parts
This part replaces obsolete part #: 746-04091
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Simple install
Although the snow season has ended I am prepared now for 2023 snow season thanks to great service and easy and fast replacement parts
Guest -
March 29, 2022
Verified Purchase
Part fit fine.
The cable was for my 17 year old Troybilt single stage snow blower. Seems to fit and work perfectly. Maybe a little costly but then so is everything these days. Service was great and quick.
Guest -
October 20, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Clutch Cable
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Bail broke due to seized cable
Dick - January 9, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
1. Removed side cover
2. Removed seized cable using a small screwdriver to pop spring away from retainer
4. Replaced bail handle
5. Routed new cable to new bail handle and slipped cable into hole.
6. Secured new cable to bottom of snowblower handle with a zip tie, replacing original
7. Replace side cover with bolts previously removed
8. Test fired and checked to see if new items work properly. Worked perfect.
9. In retrospect I should of replaced the drive belt at this time, it was showing wear.
2. Removed seized cable using a small screwdriver to pop spring away from retainer
4. Replaced bail handle
5. Routed new cable to new bail handle and slipped cable into hole.
6. Secured new cable to bottom of snowblower handle with a zip tie, replacing original
7. Replace side cover with bolts previously removed
8. Test fired and checked to see if new items work properly. Worked perfect.
9. In retrospect I should of replaced the drive belt at this time, it was showing wear.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed new cable
Daniel - October 22, 2021
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Fingers
Removed the cover and replaced the old cable . Some small adjustments required. Put the new side cover on and bingo job done!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Clutch Cable wouldn't move in casing
Robert - January 3, 2021
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Parts Used
1. Removed belt cover
2. Removed nut holding clutch cable
3. Removed clutch cable
4. Reverse order
2. Removed nut holding clutch cable
3. Removed clutch cable
4. Reverse order
Did you find this story helpful?
Thanks for voting and helping fellow customers!
NONE
Bruce - December 5, 2018
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
REMOVE BELT COVER REMOVE CABLE INSTALLED NEW CABLE.REPLACE BELT COVER.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
