Easy
1-2 hours
Bearing Flange 00428700
OEM part for: Ariens
Part Number: 00428700
$20.28
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This Bearing Flange will fit the following 638 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Ariens
926335 (ST 28 DLET)(000101 & Above) Hydro Professional 28 Inch Track Snow Blower Briggs And Stratton
Show More Compatible Models
This item works with the following types of products:
- Snowblower Parts
- Blower Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Bearing Flange
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Auger drive shaft bearing disintegrated resulting in both drive belts being destroyed
Wayne - March 13, 2019
Tool Type
Snowblower
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
1. Removed the belt cover and then the bolts holding the auger housing to the engine housing and hinged the auger away from the engine.
2. Removed the old belt pieces and the double pulley from the shaft mount. Backed the shaft mount screw out half an inch.
3. Used a steering wheel puller and three bolts to pull the pulley shaft mount from the auger drive shaft by pressing on the shaft mount screw.
4. Removed the bolts holding the horizontal auger shaft from each side of the auger housing and removed the bolts from the auger gear box and the support bracket. Slid the auger assembly out of the housing.
5. Removed the old bearing brackets. Removed rusty areas on the housing followed by priming and two coats of matching paint to inhibit further rust.
6. Installed the new sealed bearing using new brackets but left the bearing loose in the brackets. Slid the auger assembly back in place and installed all the mounting screws finger tight.
7. Tightened the bearing brackets and auger mounting bolts and checked free rotation of the auger.
8. Installed the pulley shaft mount after applying white lithium grease. Installed the double pulley wheel.
9. Hinged the auger housing and engine housing back together and bolted it in place.
10. Loosened the tension adjustment bracket on the belt idler and installed the new belts.
11. Tightened the tension adjustment idler until they would engage and disengage properly with the control lever.
12. Put the belt housing cover back on and tested the operation.
2. Removed the old belt pieces and the double pulley from the shaft mount. Backed the shaft mount screw out half an inch.
3. Used a steering wheel puller and three bolts to pull the pulley shaft mount from the auger drive shaft by pressing on the shaft mount screw.
4. Removed the bolts holding the horizontal auger shaft from each side of the auger housing and removed the bolts from the auger gear box and the support bracket. Slid the auger assembly out of the housing.
5. Removed the old bearing brackets. Removed rusty areas on the housing followed by priming and two coats of matching paint to inhibit further rust.
6. Installed the new sealed bearing using new brackets but left the bearing loose in the brackets. Slid the auger assembly back in place and installed all the mounting screws finger tight.
7. Tightened the bearing brackets and auger mounting bolts and checked free rotation of the auger.
8. Installed the pulley shaft mount after applying white lithium grease. Installed the double pulley wheel.
9. Hinged the auger housing and engine housing back together and bolted it in place.
10. Loosened the tension adjustment bracket on the belt idler and installed the new belts.
11. Tightened the tension adjustment idler until they would engage and disengage properly with the control lever.
12. Put the belt housing cover back on and tested the operation.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
