Medium
30-60 minutes
It is a genuine item that is supplied by the original equipment manufacturer for use Husqvarna handheld lawn and garden equipment. This is an identical replacement for a missing or faulty assembly cable/wire harness that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable materials and is sold individually.
Assembly Cable/wire Harness 545125301
OEM part for: Husqvarna, Jonsered
Part Number: 545125301
$38.60
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 25 machines
Husqvarna
125 E (2005-09) Edger View Diagrams & Manuals
125 E (2006-03) Edger View Diagrams & Manuals
125 E (2006-01) Edger View Diagrams & Manuals
128LD 952711969 2010-06 Trimmer/Edger View Diagrams & Manuals
128C (2010-08) Trimmer/Edger View Diagrams & Manuals
125C (2005-06) Trimmer View Diagrams & Manuals
125C (2005-09) Trimmer View Diagrams & Manuals
125RJ (2007-04) Brushcutter View Diagrams & Manuals
125RJ (2008-06) Brushcutter View Diagrams & Manuals
125RJ (2009-09) Brushcutter View Diagrams & Manuals
125L (2007-04) Trimmer View Diagrams & Manuals
124 C (952715671) (2010-08) Trimmer View Diagrams & Manuals
124 C (952715639) (2010-06) Trimmer View Diagrams & Manuals
124 C (2010-06) Trimmer View Diagrams & Manuals
124 L (2010-06) Us Can View Diagrams & Manuals
125 LDX (545014337) (2010-08) Trimmer View Diagrams & Manuals
125 LDX (2009-09) Row Trimmer View Diagrams & Manuals
125 LDX (2008-06) Trimmer View Diagrams & Manuals
125 LDX (2007-04) Trimmer View Diagrams & Manuals
128 LD (2009-08) Us Can View Diagrams & Manuals
128 LDX (545192137) (2010-08) Row Trimmer View Diagrams & Manuals
Jonsered
GC2126 C (2008-06) Trimmer View Diagrams & Manuals
GC2126 US CAN (2009-09) Trimmer View Diagrams & Manuals
GT2126 (2007-04) Trimmer View Diagrams & Manuals
GT2126 (2008-06) Trimmer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Edger Parts
- Trimmer Parts
This part replaces obsolete part #: 5301505-61, 530150561
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Throttle cable
The part was exactly what I was looking for shipping as quickly
Guest -
September 20, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Assembly Cable/wire Harness
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Throttle cable and trigger spring broke
Joseph - August 22, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Allen wrench set
1. Opened cable and spring housing on the handle of weed eater.
2. Removed broken cable and spring inside of cable housing.
3. Replaced with new cable and spring in the handle.
4. Closed housing and hoped what i just did worked :) It worked!
2. Removed broken cable and spring inside of cable housing.
3. Replaced with new cable and spring in the handle.
4. Closed housing and hoped what i just did worked :) It worked!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Throttle cable broke near carburetor.
CHAD - July 11, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Nutdriver, Allen wrench, star driver
Parts Used
1. Looked up parts online.
2. Called customer support to choose the proper cable with help from other onsite personnel.
3. Received and tried to make the wrong part fit and work (failed). not recommended.
4. Watched the video online of the proper part being replaced.
5. Took the part number from video and ordered the correct part online without needing assistance.
6. Inserted assembly through kill switch hole and set kill switch in place.
7. Attached cable to carburetor
8. Connected the kill switch wires to wire connection.
9. Installed air box to carburetor and tightened 2 nuts with nut driver.
10. Installed air filter and cover. tightened plastic nut with fingers.
11. Inserted other end of throttle cable to trigger.
12. Inserted trigger spring into the trigger and attached trigger to the left side of the handle and tested action.
13. Inserted trigger safety lever on left side of the handle.
14. Secured wires and cable in the groove of the handle and enclosed on right side of the handle.
15. Inserted handle screws and tightened with star driver.
16. Inserted shaft to handle alignment screw and tightened with Allen wrench.
17. Conducted trigger function test.
18. Started the engine and conducted the full run test.
19. Tested kill switch.
2. Called customer support to choose the proper cable with help from other onsite personnel.
3. Received and tried to make the wrong part fit and work (failed). not recommended.
4. Watched the video online of the proper part being replaced.
5. Took the part number from video and ordered the correct part online without needing assistance.
6. Inserted assembly through kill switch hole and set kill switch in place.
7. Attached cable to carburetor
8. Connected the kill switch wires to wire connection.
9. Installed air box to carburetor and tightened 2 nuts with nut driver.
10. Installed air filter and cover. tightened plastic nut with fingers.
11. Inserted other end of throttle cable to trigger.
12. Inserted trigger spring into the trigger and attached trigger to the left side of the handle and tested action.
13. Inserted trigger safety lever on left side of the handle.
14. Secured wires and cable in the groove of the handle and enclosed on right side of the handle.
15. Inserted handle screws and tightened with star driver.
16. Inserted shaft to handle alignment screw and tightened with Allen wrench.
17. Conducted trigger function test.
18. Started the engine and conducted the full run test.
19. Tested kill switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
