Medium
30-60 minutes
This armature is an authentic Dewalt replacement part. It is sourced from original equipment manufacturer for use with impact wrenches. The armature is a key component of an electric motor. In conjunction with a field it is what creates the motion. Over time, especially if the tool is constantly overloaded, it may begin to smoke or spark. This is caused by worn out armature insulation. Replacing an armature should resolve the issue and prevent further damage to the tool. It is recommended to replace both carbon brushes when replacing an armature. This assembly consists of an armature with the fan and both end bearings.
When replacing an armature you will need a screwdriver set, a wrench set and pliers.
• Make sure the tool is unplugged
• Remove the housing
• Remove the brushes
• Remove the armature
• Secure the new armature in place
• Reassemble and test the tool
Armature Assembly 646694-03SV
OEM part for: DeWALT
Part Number: 646694-03SV
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.30 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 27 machines
DeWALT
This item works with the following types of products:
- Impact Driver Parts
- Impact Wrench Parts
This part replaces obsolete part #: 646694-03sv, 646694-03
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Armature Assembly
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Motor ran but driver did nothing!
Tool Type
Impact Driver
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Torx set
Parts Used
2. Carefully split case
3. Took out armature of motor
4. Made sure gear on end of motor was the issue ( which it was )
5. Put in new armature (checked brushes which were good)
6. Put the case back together and all of the torx screws
7. Tested driver (works like brand new)
Imact driver motor would run, but not drive bit.
Tool Type
Impact Driver
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Torx driver
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
