Medium
30-60 minutes
This traction belt is supplied directly from the original equipment manufacturer. The belt is fitted onto the pulleys, transmitting force to related components. This rubber composite item is sold individually. A screwdriver and a wrench are necessary for the replacement. It is recommended to purchase a spare as belts can wear out over time and regular use.
Traction Belt 532419744
OEM part for: Husqvarna, Craftsman, Poulan, Jonsered
Part Number: 532419744
$37.13
In Stock
Order within the next 6 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Traction Belt will fit the following 164 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Husqvarna
Craftsman
Poulan
Jonsered
Show More Compatible ModelsThis item works with the following types of products:
- Snowblower Parts
This part replaces obsolete part #: 419744
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Traction Belt
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Broken traction, disk chewed up belts
Darryl - February 27, 2018
👍 2 of 2 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Socket set
Parts Used
Access covers off
1 long pin removed after pulling left wheel
Remove nut holding disc to black plate and remove
Install new disc to plate
Thread belts onto pulleys
Tensioners OK
Install long pin and secure with E clip
Wheel back on : test for proper operation
Access covers back on
1 long pin removed after pulling left wheel
Remove nut holding disc to black plate and remove
Install new disc to plate
Thread belts onto pulleys
Tensioners OK
Install long pin and secure with E clip
Wheel back on : test for proper operation
Access covers back on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Drive and auger belt broke
Richard - February 1, 2022
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, Nutdriver
Parts Used
Watched YouTube to learn how to replace the belts.
Followed the instructions.
The belt removal and installation slightly different from the video.
But installing the belts went smoothly,
getting the belt tensioner took a little work, but when all was done and put back together the snowblower is working like new.
Followed the instructions.
The belt removal and installation slightly different from the video.
But installing the belts went smoothly,
getting the belt tensioner took a little work, but when all was done and put back together the snowblower is working like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No drive
William - February 27, 2019
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, Socket set, Wrench Set, Nutdriver, Ratchet
cut off the old belt it was stuck in the machine, followed a video from you tube which was close , but did not cover everything on my Machine, figured out the rest as I went along. There had been some differences in my Model but overall the video was helpful. I may have some other pully problems and nee to buy some more parts. but I did get the machine running, and e replacement parts had the parts I needed .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
traction belt was comming off the pullies
Nathan - February 4, 2019
Tool Type
Snowblower
Difficulty
Medium
Time
1-2 hours
Tools Used
Socket set, Wrench Set
Parts Used
removed front of blower slide belt over pullies
Did you find this story helpful?
Thanks for voting and helping fellow customers!
traction belt broke, idler pulley worn out, scraper blade worn.
JERRY - January 11, 2019
👍 0 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, none
disassembled as necessary. replaced broken or worn parts, reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
