Throttle Cable Bracket Screw

Removed the carburetor. (Two screws behind the air filter and remove throttle cable)
Bought a complete carburetor with a manifold gasket.
Replaced the gasket and installed the new carburetor.
Dismantled the throttle handle assembly (3 screws)
Removed the old throttle cable. (Had to pull it out of the plastic conduit on the arm)
Installed the new cable, feeding it back through the soft plastic conduit. (easy)
Reassembled the throttle housing.
Attached cable to the carburetor and tightened the lock nuts.(original position)
Blower started right up on the 2nd pull.
No adjustment needed to the Hi/Low fuel screws or the carburetor throttle cable.
Runs like new!