Thermal Relay JMD18-303
OEM part for: Jet
Part Number: JMD18-303
Compatibility
This part will fit the following 2 machines
Jet
This item works with the following types of products:
- Drill Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Thermal Relay
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Changed a 2hp mill/drill motor from 110v. to 220v. which requires changing the supplied 30 amp. breaker.reaker to a 15 amp
Tool Type
Drill Press
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
Parts Used
2.Remove tape covering wire nuts. This will allow you to see the numbers on the wires.
3.Rearrange and wire nut wires according to diagram on inside of cover for 220 v. operation.
4.Retape wires and wire nut connections.
5.Pull spade connectors off of old (30 amp.) breaker.
6.Remove retaining nut from old breaker and pull breaker from housing. Save the breaker, you may want to switch back to 110 v. down the road.
7.Push new 15 amp. breaker into housing and fasten with thin nut.
8.Push spade connectors, removed in step 5, back onto new breaker terminals.
9.Replace wiring cover back onto motor housing.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.