Easy
15-30 minutes
This service switch is specially designed for Milwaukee sawzall reciprocating saws. It is an authentic item supplied from original manufacturer. It is the main switch that allows user to turn the saw on and off. This assembly includes a plastic trigger and a mechanical switch with two lead wires attached.
Replacing this service switch is a relatively easy talk that would only require a torx screwdriver. Make sure to check wiring diagram when connecting the switch.
• Remove housing screws
• Open up the casing
• Disconnect wires from the old switch
• Remove old switch and secure new one
• Reconnect wires
• Reassemble and test the unit
Switch Service 23-66-1719
OEM part for: Milwaukee
Part Number: 23-66-1719
$90.38
In Stock
Order within the next 14 hours and your part ships today! 
Product Description ?
- Classification: Part
- Weight: 0.21 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 4 machines
Milwaukee
0719-20 (SER A56B) Sawzall View Diagrams & Manuals
0719-20 (SER A56A) V28 Sawzall Reciprocating Saw View Diagrams & Manuals
0719-22 (SER A56B) Cordless Sawzall View Diagrams & Manuals
0719-20 Cordless Sawzall View Diagrams & Manuals
This item works with the following types of products:
- Saw Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch Service
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Electrical tool stayed on all the time
BOB - December 10, 2015
👍 1 of 1 people found this instruction helpful
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Soldering iron
Parts Used
Unscrewed the side of the case pulled the trigger got soldering iron to heat up the Solder that was holding the wires put the new one in solder it up put the screws back on the case. Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Trigger switch on my 28V Milwaukee Sawzall failed after 15 years of service.
Dennis - June 24, 2020
Tool Type
Cordless Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Removed switch and brushes.
Found the replacement parts at ereplacementparts .com.
Ordered them and within a week they arrived.
Installed them in the saw and they worked perfectly.
As the machine was apart I also replaced the brushes.
Thanks for the rapid turn-around
This tool is not a drill
Found the replacement parts at ereplacementparts .com.
Ordered them and within a week they arrived.
Installed them in the saw and they worked perfectly.
As the machine was apart I also replaced the brushes.
Thanks for the rapid turn-around
This tool is not a drill
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Trigger malfunction
Scott - October 15, 2016
Tool Type
Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Dismantled tool handle, remove the leads from the old switch, then connect the leads to the new switch. Then assemble handle. Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch not working , Handle halves broken
William - March 29, 2016
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Soldering iron
Remove screws from the handle halves, make up a wiring diagram. Unsolder old switch then solder in the new switch. Attach new handle halves and you done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
