Easy
15-30 minutes
Speed Adjusting Switch Set 708015-116
OEM part for: Jet
Part Number: 708015-116
$54.94
In Stock
Ships within 1 business day 
Compatibility
This Speed Adjusting Switch Set will fit the following 1 machine. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Jet
This item works with the following types of products:
- Polisher Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Speed Adjusting Switch Set
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Motor would not run.
Ray - April 18, 2017
Tool Type
Polisher
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. UNPLUG THE MACHINE FROM THE POWER SOURCE!
2. Remove 4 Phillips screws holding the power switch and speed control assembly.
3. Remove the assembly and disconnect the power connections from the power switch taking note of the wire connection locations for reassembly.
4. Disconnect the motor wires from the speed control circuit board taking note of the wire connection locations for reassembly.
5. Remove 2 Phillips screws holding the circuit board and remove the board.
6. Replace the board and reassemble the unit following the previous steps in reverse order.
7. Reconnect the power and turn the unit on. Check the rotation direction of the motor. If it is running backwards, switch the motor connections on the circuit board around.
2. Remove 4 Phillips screws holding the power switch and speed control assembly.
3. Remove the assembly and disconnect the power connections from the power switch taking note of the wire connection locations for reassembly.
4. Disconnect the motor wires from the speed control circuit board taking note of the wire connection locations for reassembly.
5. Remove 2 Phillips screws holding the circuit board and remove the board.
6. Replace the board and reassemble the unit following the previous steps in reverse order.
7. Reconnect the power and turn the unit on. Check the rotation direction of the motor. If it is running backwards, switch the motor connections on the circuit board around.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Unit would not power on.
Mark - March 18, 2017
Tool Type
Polisher
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
I removed the control board and the speed adjusting switch set. I replaced them with new parts from eReplacements and I also replaced the waterproof switch. After this the machine powered right up and back to sharpening and polishing again.
Thanks for the service and the right parts!!!
Thanks for the service and the right parts!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Speed control failed.
Louis - November 3, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Polisher
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Installed the new speed control. Works fine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sharpener stopped working, speed control circuit board bad
Stephen - August 25, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Polisher
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Allen wrench
1. Removed 4 screws holding speed control - on/off switch face plate to power box
2. Disconnected power wires from on/off switch & removed wires from old circuit board after removing it from the power box, popped existing on/off switch out of face plate
3. Assembled new speed control to face plate, adhered new label & secured new knob with allen screw (allen screw is extremely tiny, be careful not to drop it)
4. Removed existing wires from old circuit board & installed on new circuit board
5. Screwed new circuit board in place inside power box
6. Snapped existing on/off switch into new face plate & re-connected power wires
7. Re-installed speed control - on/off switch face plate to power box
8. Plugged in power cord & tested sharpener to run properly & confirm correct direction of wet stone rotation
2. Disconnected power wires from on/off switch & removed wires from old circuit board after removing it from the power box, popped existing on/off switch out of face plate
3. Assembled new speed control to face plate, adhered new label & secured new knob with allen screw (allen screw is extremely tiny, be careful not to drop it)
4. Removed existing wires from old circuit board & installed on new circuit board
5. Screwed new circuit board in place inside power box
6. Snapped existing on/off switch into new face plate & re-connected power wires
7. Re-installed speed control - on/off switch face plate to power box
8. Plugged in power cord & tested sharpener to run properly & confirm correct direction of wet stone rotation
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
