Medium
More than 2 hours
It is an authentic OEM part which is made for riding lawn mowers and garden tractors. This is one of the special bearing-sleeves that are secured on the transmission shaft. It helps to secure the bearing. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. One durable metal bearing-sleeve is included. Make sure to check the appropriate diagrams for your model for the correct installation of the new component. You will need a wrench set to perform this repair.
Brg-sleeve 741-05060
OEM part for: MTD, Ryobi, Yard Machines, Bolens, Yard Man, Troy-Bilt, Cub Cadet, Husky
Part Number: 741-05060
$8.85
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Brg-sleeve will fit the following 17984 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Ryobi
Yard Machines
MTD
Bolens
Yard Man
Troy-Bilt
Cub Cadet
Husky
Show More Compatible ModelsThis item works with the following types of products:
- Lawn Tractor Parts
- Lawn Mower Parts
This part replaces obsolete part #: 7410340, 941-0340, 741-0340
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great parts !
Good experience! Great diagrams for ordering parts. Quality parts . Repair went well. Will use again in the future. Thanks !
Guest -
October 6, 2023
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Brg-sleeve
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Transaxle was loose around the seal and bushing.
Don - May 10, 2020
Tool Type
Lawn Tractor
Difficulty
Medium
Time
More than 2 hours
Tools Used
Socket set, Wrench Set, Nutdriver, Adjustable Wrench, Length of rope for removing springs and holding pulley
1. Removed transmission cover and then drive belt from transmission by loosening tension on the Idler pulley.
2. Removed the battery and battery holder. Removed large spring from bracket attached to transaxle.
3. Removed pin to loosen the F N R shifter linkage from the transaxle.
4. Loosened and removed the brake assembly securing all the springs, pucks, and hardware. 5.Removed four large bolts and two smaller bolts that held the transaxle to the tractor frame.
6. Replaced the seals, bushings, and bearings and added 00 grease.
7. Cleaned and lubed all the parts and transaxle assembly.
8. Reversed the process for reassembly.
9. Success!
2. Removed the battery and battery holder. Removed large spring from bracket attached to transaxle.
3. Removed pin to loosen the F N R shifter linkage from the transaxle.
4. Loosened and removed the brake assembly securing all the springs, pucks, and hardware. 5.Removed four large bolts and two smaller bolts that held the transaxle to the tractor frame.
6. Replaced the seals, bushings, and bearings and added 00 grease.
7. Cleaned and lubed all the parts and transaxle assembly.
8. Reversed the process for reassembly.
9. Success!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bad seals and bearings in the rear end.
pete - June 4, 2017
Tool Type
Lawn Tractor
Difficulty
Medium
Time
More than 2 hours
Tools Used
Socket set, Jack stands
Jack up back of mower, remove tires and then remove the seat, battery the two drive belts, the brake cable, remove pin from shifting arm and disconnect. there are two springs that also have to be removed. One is very strong so you may need some help with it. There is the drive pulley on top of the transmission that I also removed to make the repair work a little easier. I then put the unit on the work bench and removed all the bolts. They all the same length so you can't mix them up when you put them back. Be careful removing the top half of the axle because there is a ball bearing under the shifting arm that is spring loaded that can pop out if the arm moves. The parts are all easy to replace, just take your time. You just reverse your steps putting it back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
