eReplacementParts.com
877-346-4814
Ryobi Parts
Repair Parts Home
  
Lawn Equipment Parts
  
Ryobi Parts
  921-0338 Seal-.750x1.00x.12

Seal-.​750x1.​00x.​12 921-0338

OEM part for: Troy-Bilt, Ryobi, Yard Machines, MTD

Part Number: 921-0338


Install
Videos!
Seal-.750x1.00x.12 - 921-0338:Troy-Bilt 360 View
Seal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-BiltSeal-.750x1.00x.12 - 921-0338:Troy-Bilt 360 View
In Stock
Ships within 1 business day
Medium More than 2 hours (3 rated repairs)?
OEM: Original Equipment Manufacturer ?
Troy-BiltRyobiYard MachinesMTD

Product Description ?

This item is an original part for use in lawn tractors made by Troy-Bilt, Ryobi, Yard Machines, MTD, Bolens, Yard Man, and Cub Cadet. The seal goes next to the bearing-sleeve and helps to stop the oil from leaking. You may need a socket set when replacing this part which is made of plastic. Over time this item may break and will need to be replaced. Keep in mind this high-quality part is sold individually even though two may be needed.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This Seal-.​750x1.​00x.​12 will fit the following 5616 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Lawn Tractor Parts

This part replaces obsolete part #: 721-0338, 7210338, 721-0338

Customer Part Reviews ?

5
Average Rating (out of 5):
1 Review
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Exactly like the original seal
    The seal was exactly like the one installed at the factory.
    Guest - January 4, 2021 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Seal-.​750x1.​00x.​12


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium More than 2 hours (3 rated repairs)?

    Bad seals and bearings in the rear end.

    pete - June 4, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Lawn Tractor

    Difficulty

    Medium

    Time

    More than 2 hours

    Tools Used

    Socket set, Jack stands

    Jack up back of mower, remove tires and then remove the seat, battery the two drive belts, the brake cable, remove pin from shifting arm and disconnect. there are two springs that also have to be removed. One is very strong so you may need some help with it. There is the drive pulley on top of the transmission that I also removed to make the repair work a little easier. I then put the unit on the work bench and removed all the bolts. They all the same length so you can't mix them up when you put them back. Be careful removing the top half of the axle because there is a ball bearing under the shifting arm that is spring loaded that can pop out if the arm moves. The parts are all easy to replace, just take your time. You just reverse your steps putting it back together.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Sheared the brass auger gear inside the gear box

    Jamie - February 17, 2022
    Tool Type

    Snowblower

    Difficulty

    Medium

    Time

    1-2 hours

    Tools Used

    Screwdriver, Pliers, Socket set, Wrench Set, Gasket scraper,silicone,brush,brake cleaner,grease

    Removed front scoop,Removed pulley, removed bolts the 3 bolts on each side holding the augers in place. Removed the whole !auger assembly from scoop. Removed 4 shear pins, pulled off 4 augers blades "2RH 2LH" and plastic spacers/bushings. Removed 5 bolts holding the 2 case halves and separated case. Cleaned thoroughly and scraped old gasket "silicone". Replaced gear with new one. Also replaced the keyway and shear pin. Replaced the 3 shaft oil seals also. Reverse procedure to assemble. Using silicone and grease to assemble. Use diff oil where applicable.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Transaxle was loose around the seal and bushing.

    Don - May 10, 2020
    Tool Type

    Lawn Tractor

    Difficulty

    Medium

    Time

    More than 2 hours

    Tools Used

    Socket set, Wrench Set, Nutdriver, Adjustable Wrench, Length of rope for removing springs and holding pulley

    1. Removed transmission cover and then drive belt from transmission by loosening tension on the Idler pulley.
    2. Removed the battery and battery holder. Removed large spring from bracket attached to transaxle.
    3. Removed pin to loosen the F N R shifter linkage from the transaxle.
    4. Loosened and removed the brake assembly securing all the springs, pucks, and hardware. 5.Removed four large bolts and two smaller bolts that held the transaxle to the tractor frame.
    6. Replaced the seals, bushings, and bearings and added 00 grease.
    7. Cleaned and lubed all the parts and transaxle assembly.
    8. Reversed the process for reassembly.
    9. Success!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal
    Recent searches:
    Suggested searches:
    Models:
    Manufacturers:
    Need help finding your model number?