Easy
15-30 minutes
This shift lever is an OEM direct from the Milwaukee manufacturer. Made for use with many drill devices, the metal and plastic lever is fastened into the gear case. The shift lever allows the operator to select the preferred gear, and is sold individually. A screwdriver and needle nose pliers are often required for the repair.
Shift Lever 44-10-0095
OEM part for: Milwaukee
Part Number: 44-10-0095
$4.99
In Stock
Order within the next 7 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 7 machines
Milwaukee
5378-20 (SER 897A) 1/2" Electric Hammer Drill View Diagrams & Manuals
5378-20 (SER 897B) 1/2" Electric Hammer Drill View Diagrams & Manuals
5378-20 (SER 897C) 1/2" Electric Hammer Drill View Diagrams & Manuals
5378-20 (SER 897D) 1/2" Electric Hammer Drill View Diagrams & Manuals
5378-20 (SER 897E) Electric Drill View Diagrams & Manuals
5378-51 (SER 942A) 13mm Hammer-Drill View Diagrams & Manuals
5380-21 (SER B01A) 1/2 " Hammer Drill View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Drill Parts
- Electric Drill Parts
- Hammer Drill Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
MONTURA INSTANTANEA
RAPIDO SU INSTALACION Y FUNCIONO A LAS MIL MARAVILLA.
Felix -
April 17, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Shift Lever
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Lost lever
Charles - April 18, 2021
Tool Type
Hammer Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Inserted new lever and ring
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Shift lever broke
Tim - October 17, 2018
Tool Type
Hammer Drill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set
1. Removed chuck
2. Removed drill case
3. Replaced broken shift lever
4. Installed retaining spring
5. Reassembled drill
2. Removed drill case
3. Replaced broken shift lever
4. Installed retaining spring
5. Reassembled drill
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No power after it had overheated
Adrien - September 7, 2017
Tool Type
Electric Drill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, needle nose pliers
Parts Used
1. Removed the black rubber piece at back of the drill which provided access to one of the screws. I used a small screwdriver to pry the black rubber piece loose.
2 Removed all the screws from the side of the drill and from the front.
3. Separated the red parts of the drill then the black front of the drill removing the armature from the field.
4. Removed the wires from the field then removed and replaced the field.
5. Installed the front black portion of the drill, installing the armature in the field.
6. Installed all screws in the red part of the drill and tightened them.
7. Separated the two front black portions and pulled clip from the shift lever.
8. Removed cracked shift lever and installed new one, reinstalling the clip.
9. Installed the black portion back on the drill but it wouldn't go all the way back on. I checked and found a pin on one of the gears had fallen out. I reinstalled it and while holding the front black portion up (with drill chuck down) and then installing the drill onto the front black portion. This prevented the pin from falling out again.
10. Installed the screws on front of the drill and tightened.
The drill now has all the power it had originally and the shift lever dose not fall out anymore.
2 Removed all the screws from the side of the drill and from the front.
3. Separated the red parts of the drill then the black front of the drill removing the armature from the field.
4. Removed the wires from the field then removed and replaced the field.
5. Installed the front black portion of the drill, installing the armature in the field.
6. Installed all screws in the red part of the drill and tightened them.
7. Separated the two front black portions and pulled clip from the shift lever.
8. Removed cracked shift lever and installed new one, reinstalling the clip.
9. Installed the black portion back on the drill but it wouldn't go all the way back on. I checked and found a pin on one of the gears had fallen out. I reinstalled it and while holding the front black portion up (with drill chuck down) and then installing the drill onto the front black portion. This prevented the pin from falling out again.
10. Installed the screws on front of the drill and tightened.
The drill now has all the power it had originally and the shift lever dose not fall out anymore.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Plastic switch dail broke
MATT - March 14, 2016
Tool Type
Hammer Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Take drill casing apart and replaced broken parts as needed, it was straight forwarded once the drill case was opened, your online parts diagram and service were the key to our success!
Thank
You
Thank
You
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
