Easy
30-60 minutes
This replacement part is supplied directly from original equipment manufacturer for use with Toro snow blowers/throwers. Scrapers are designed to absorb a lot of friction while the machine is in operation. You can tell that a snowblower has a worn scraper because it will no longer be able to clear the sidewalk, leaving patches behind. Please note, paddles and scrapers are designed to wear at approximately the same rate, so it's always a good idea to replace them both at the same time. Keep in mind this high-quality scraper is made of durable vinyl material and is sold individually.
Scraper 117-7717
OEM part for: Toro
Part Number: 117-7717
$26.14
In Stock
Order within the next 3 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Scraper will fit the following 38 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Toro
Show More Compatible ModelsThis item works with the following types of products:
- Snowblower Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Part really helps blower to work correctly.
Very easy to replace. Hoever, It should include new screws to install. If the scraper is worn out the screws are usually worn off as well. Had to use a grinder to get old screws out. Fortunately I had some screws that fit in my tool box.
Jimmy -
January 14, 2022
Verified Purchase
Worked as expected
Great condition, fit perfectly
Guest -
November 30, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Scraper
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The rubber on the blades was worn down
Boyd - November 19, 2019
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Cut off tool.
Removed all the screws on the first blade, pulled old rubber blade off the machine. Placed new rubber on machine and started all new screws. Came back and tightened all screws and started on the second blade ( same process ) then used a cutoff tool to cut through all the original screws on the scraper blade that was worn down below the head. Popped off old scraper and used new screws and locknuts to reinstall the new scraper. Job finished, it was really very easy using original replacement parts from ereplacementparts.com!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
did not throw snow well
Gene - February 1, 2019
Tool Type
Snowblower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Nutdriver
removed worn out parts and replaced them fixed the problem
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Scraper bar was worn, paddles were worn and I install a new spark plug each year. Snow blower is 5 years old.
Walter - November 25, 2015
👍 1 of 2 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
Removed the old scraper bar, it was simple, unbolted each of the two paddles. Removed and installed the new plug.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The old scraper was broken so most of the repair time was spent removing the old scraper and screws. Installation was much faster.
Mark - December 28, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
Remove worn screws and old scraper with a pliers, cleaned area of rust, sprayed holes with cylicon and any areas where rust was forming.
Installed scraper, lining up the holes incerted and tightened screws. Job complete
Installed scraper, lining up the holes incerted and tightened screws. Job complete
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
