Scraper 71-5390
Part Number: 71-5390
Order within the next 8 hours
and your part ships today!
and your part ships today!
Product Information
Description:
Keep in mind this part is made of plastic and is priced individually. The scraper attaches to the lower housing. A screwdriver might be required during the replacement of this part. It will require replacing if it cracks or breaks. This is a genuine replacement part sourced from the original manufacturer for use with Toro snowthrowers and Lawn Boy snowblowers. |
Frequently Purchased With
Compatibility
the 40 compatible machines
This part is compatible with the following machines:
Toro
38400 (200000001-200999999)(2000) Snowthrower
38400 (99000001-99999999)(1999) Snowthrower
38405 (210000001-210999999)(2001) Snowthrower
38405 (200000001-200999999)(2000) Snowthrower
38405 (99000001-99999999)(1999) Snowthrower
38190 (69000001-69999999)(1996) Snowthrower
38190 (59000001-59999999)(1995) Snowthrower
38190 (49000001-49999999)(1994) Snowthrower
38190 (39000001-39999999)(1993) Snowthrower
38190 (2000001-2999999)(1992) Snowthrower
38190 (1000001-1999999)(1991) Snowthrower
38190 (0000001-0999999)(1990) Snowthrower
38191 (6900001-6999999)(1996) Snowthrower
38191 (5900001-5999999)(1995) Snowthrower
38191 (4900001-4999999)(1994) Snowthrower
38400 (99000001-99999999)(1999) Snowthrower
38405 (210000001-210999999)(2001) Snowthrower
38405 (200000001-200999999)(2000) Snowthrower
38405 (99000001-99999999)(1999) Snowthrower
38190 (69000001-69999999)(1996) Snowthrower
38190 (59000001-59999999)(1995) Snowthrower
38190 (49000001-49999999)(1994) Snowthrower
38190 (39000001-39999999)(1993) Snowthrower
38190 (2000001-2999999)(1992) Snowthrower
38190 (1000001-1999999)(1991) Snowthrower
38190 (0000001-0999999)(1990) Snowthrower
38191 (6900001-6999999)(1996) Snowthrower
38191 (5900001-5999999)(1995) Snowthrower
38191 (4900001-4999999)(1994) Snowthrower
38191 (3900001-3999999)(1993) Snowthrower
38191 (2000001-2999999)(1992) Snowthrower
38195 (69000001-69999999)(1996) Snowthrower
38195 (59000001-59999999)(1995) Snowthrower
38195 (49000001-49999999)(1994) Snowthrower
38195 (39000001-39999999)(1993) Snowthrower
38195 (2000001-2999999)(1992) Snowthrower
38195 (1000001-1999999)(1991) Snowthrower
38195 (0000001-0999999)(1990) Snowthrower
38196 (6900001-6999999)(1996) Snowthrower
38196 (5900001-5999999)(1995) Snowthrower
38196 (4900001-4999999)(1994) Snowthrower
38196 (3900001-3999999)(1993) Snowthrower
38196 (2000001-2999999)(1992) Snowthrower
38191 (2000001-2999999)(1992) Snowthrower
38195 (69000001-69999999)(1996) Snowthrower
38195 (59000001-59999999)(1995) Snowthrower
38195 (49000001-49999999)(1994) Snowthrower
38195 (39000001-39999999)(1993) Snowthrower
38195 (2000001-2999999)(1992) Snowthrower
38195 (1000001-1999999)(1991) Snowthrower
38195 (0000001-0999999)(1990) Snowthrower
38196 (6900001-6999999)(1996) Snowthrower
38196 (5900001-5999999)(1995) Snowthrower
38196 (4900001-4999999)(1994) Snowthrower
38196 (3900001-3999999)(1993) Snowthrower
38196 (2000001-2999999)(1992) Snowthrower
Lawn Boy
Products Compatibility
This item works with the following types of products:
- • Snowblower
Questions & Answers for Scraper
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
5 of 6 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Grinder/cutter to cut off the rusted bolts.
Scraper was wornout and falling off.
Needed to cut/grind off the 3 bolts holding it on (rusted)
Once completed, put the new scraper in place and bolt on.
REMEMBER TO ORDER THE 3 BOLTS NECESSARY!!
Once completed, put the new scraper in place and bolt on.
REMEMBER TO ORDER THE 3 BOLTS NECESSARY!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, Cutting tool to remove rusted bolts
Scraper worn.
1. Put the blower on the bench.
2. Looked at the bolts, found to be rusted.
3. Took the die grinder with a cut off wheel and cut 3 bolts off.
4. Replaced the nuts and the bolts with stainless steel bolts, nuts, and lock washers.
5. Parts fit perfectly.
2. Looked at the bolts, found to be rusted.
3. Took the die grinder with a cut off wheel and cut 3 bolts off.
4. Replaced the nuts and the bolts with stainless steel bolts, nuts, and lock washers.
5. Parts fit perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set, Nutdriver
Blades were touching the ground
Undid the three bolts on the bottom hold on the scraper.
Removed old scraper.
Attached new scraper using old bolts (probably should have replaced them with new).
Tested, blades are now off the ground when at rest.
Removed old scraper.
Attached new scraper using old bolts (probably should have replaced them with new).
Tested, blades are now off the ground when at rest.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set
scraping edge on the Toro snowblower had worn thru.
Remove #3 - 1/2" bolts, pull old scraper edge off and replace with new.
It is great to have eReplacementparts available with such a complete and diverse selection of parts that are shipped so promptly.
It is great to have eReplacementparts available with such a complete and diverse selection of parts that are shipped so promptly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set
Blades were 15 years old and were worn out. Scraper was torn off years ago
removed both old blades and scraped screws.
When installing the new blades there is very little room to start the lower nut on each. Using long nose pliers was helpful.
When installing the new blades there is very little room to start the lower nut on each. Using long nose pliers was helpful.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Super quick delivery
Had the part I needed. Quick delivery. Will use the site again.
Guest -
February 8, 2022
Verified Purchase
Easy fix fast service
part arrived in time for me to install it before next snowfall (snow blower part), great service , Art H
Arthur -
February 4, 2021
Verified Purchase
easy repair. fit perfectly.
Part was a perfect match. Easy installation.
Guest -
October 19, 2019
Verified Purchase
Scraper replacement
Arrived quickly but the scraper itself was to long and the holes didn't line up. Fortunately, I was able to modify it so it would work. You might want to check that part was miss marked.
Jim -
December 20, 2022
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information