Medium
30-60 minutes
This is an authentic manufacturer made replacement part which is specially designed for use with Husqvarna, Poulan, and Jonsered snow blowers. The scraper blade attaches to the bottom of the auger housing, to protect the housing and augers from ice and other debris. This part is made of durable plastic and is sold individually. Before installation, be sure to remove the ignition key. You will need a socket wrench to aid you in this repair.
Scraper 580502601
OEM part for: Husqvarna, Poulan, Jonsered
Part Number: 580502601
$79.36
Factory Backorder
Date Available: Unknown 
Compatibility
This Scraper will fit the following 32 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 32 matching models.
32 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Husqvarna
- Jonsered
- Poulan
This item works with the following types of products:
- Snowblower
This part replaces obsolete part #: 532442942
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Scraper
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Scraper blade worn out, need to replace with new.
Gary - March 30, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Hard
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, Vise grips, Chisel, hacksaw
Parts Used
1.Tried to remove the 3 carriage bolts with socket set that held the scraper blade.
2. One came off fairly easy. Carriage bolts were extremely rusty. Used WD-40 on them and let sit for one day prior to removing scraper.
3. 2nd carriage bolt loosened somewhat but stripped out the square hole but was enough to grip the head with a vise grips to remove this nut and carriage bolt.
4. 3rd bolt also stripped the square hole, but could not get a vise grips on the head to hold it enough, but enough to cut the bolt somewhat underneath between the nut with a hacksaw and chisel to remove bolt and nut.
5. Replace old scraper blade with new, but did not use carriage bolts but used hex head bolts instead due to the square hold where the carriage bolts fit were stripped out.
2. One came off fairly easy. Carriage bolts were extremely rusty. Used WD-40 on them and let sit for one day prior to removing scraper.
3. 2nd carriage bolt loosened somewhat but stripped out the square hole but was enough to grip the head with a vise grips to remove this nut and carriage bolt.
4. 3rd bolt also stripped the square hole, but could not get a vise grips on the head to hold it enough, but enough to cut the bolt somewhat underneath between the nut with a hacksaw and chisel to remove bolt and nut.
5. Replace old scraper blade with new, but did not use carriage bolts but used hex head bolts instead due to the square hold where the carriage bolts fit were stripped out.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Snowblower wore out the parts which contacted the cement when in use
Marc - May 21, 2020
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set
1. Removed the rubber blades.
2. Removed the scraper
3. Removed the scraper skirt
4. installed the new skirt with the existing hardware
5. Installed the new scraper with the new bolts and nuts
6. Installed the new rubber blades with the existing hardware.
Access is only possible if the blower is lifted off the ground or rocked back on about a 45 degree angle. Rocking it back will drain some of the oil and make quite a mess, so I took the opportunity to change oil by draining the oil first, performing the repair as noted above, and then refilling with the recommended oil.
2. Removed the scraper
3. Removed the scraper skirt
4. installed the new skirt with the existing hardware
5. Installed the new scraper with the new bolts and nuts
6. Installed the new rubber blades with the existing hardware.
Access is only possible if the blower is lifted off the ground or rocked back on about a 45 degree angle. Rocking it back will drain some of the oil and make quite a mess, so I took the opportunity to change oil by draining the oil first, performing the repair as noted above, and then refilling with the recommended oil.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
SNOWBLOWER NEEDED NEW PADDLES AND SCRAPPER BLADE
MARK - March 2, 2020
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Nutdriver
Parts Used
TOOK OFF OLD PADDLES AND REPLACED WITH NEW ONES AND PUT ON NEW SCRAPPER EDGE WITH NEW ONE..IN THE PROSESE BROKE SOME PICECES NOW I NEED MORE PARTS AGAIN!!!!!!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
