Easy
15-30 minutes
This item has been OEM sourced to ensure a high level of quality. The metal chain is intended to be used with chainsaws from Ryobi. Overtime the chain can wear down and can cause issues with the performance of the saw. This chain can be used as a direct replacement of a worn down ten-inch chain. The saw chain is sold as an individual replacement part.
Saw Chain 693814001
OEM part for: Ryobi
Part Number: 693814001
$11.86
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 5 machines
Ryobi
P546 P546 18 Volt Chainsaw Mfg. No. 107175001 View Diagrams & Manuals
RY40051 (311069004) Pole Saw Attachment View Diagrams & Manuals
RY40051VNM (316199001) Pole Saw Attachment View Diagrams & Manuals
RYPRN33 (090112021) Expand-It Pruner Attachment View Diagrams & Manuals
RYPRN33VNM Ryprn33vnm Expand-It Pruner Attachment Mfg. No. 095112101 8-10-21 (Rev:03) View Diagrams & Manuals
This item works with the following types of products:
- Chain Saw Parts
- Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
easy!!!
Perfect fit
Billy -
August 9, 2023
Verified Purchase
Part worked as expected
Part worked as expected
Guest -
May 3, 2022
Verified Purchase
Part fit perfectly, shipping was slow but I live in Hawaii. Before the saw chain arrived I found the same part in Walmart for 1/3 your price.
Yes it was the correct part.
Stephen -
September 28, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Saw Chain
6 inch chain for Robia prunning saw
Harry
for model number 6 inch prunning saw
asked on 2023-03-03
Hi Harry,
Thank you for your question. Before we can provide you with information on the chain, we will need the model number from your pruning saw. The model number will be found on a warning label with the Ryobi logo in the upper left corner. The model number will be to the right of it. If you could resubmit your question with this information, we would be happy to help you. We look forward to hearing from you!
eReplacementParts Team March 03, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Needed new chain
Billy - August 11, 2023
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Easy
removed old chain installed new chain
removed old chain installed new chain
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Had replaced the chain with a substitute brand. The drive links cut deep grooves into the drive sprocket. When the bar finally wore out I couldn't find the parts available locally to make the repairs
Gregory - June 15, 2021
Tool Type
Pruner
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Adjustable Wrench
Removed the nut that holds the cover and bar in place. Slightly loosen the chain tension screw. Remove the "C" clip and the chain deflector from the drive shaft. Lift the bar and chain off of the housing. Remove the drive sprocket from the shaft. Clean the housing and cover. Install the new drive sprocket on the shaft. Install the chain on the bar in the proper direction. (Proper direction is indiated on bar and on housing cover.) Place the bar and chain on the cover stud, with the drive links of the chain in the drive sprocket grooves, and the hole in the bar onto the tensioner tang. Install the chain deflector and "C" clip on the drive shaft. Install the cover and the nut onto the housing stud hand tight. Properly tension the chain with the tension adjusting screw. Tighten the nut on the housing stud to secure the bar and cover in place. There is a small hole at the outer end of the bar where the internal chain sprocket in the bar is located. An occasional few drops of oil on both sides will help prolong the life of the bar.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lost bolt and chain was stretched
Kenneth - August 20, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed old chain and replaced with new one
Installed cover plate with new bolt
Installed cover plate with new bolt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
