Easy
15-30 minutes
This is an authentic replacement part manufactured for use with Ryobi orbital jigsaws. This special saw bar assembly is used to secure and drive the saw blade. The saw bar is available as an individual replacement part, please see model diagram for associative parts.
Assembly Saw Bar 304944002
OEM part for: Ryobi
Part Number: 304944002
$12.81
In Stock
Ships within 1 business day 
Compatibility
This Assembly Saw Bar will fit the following 2 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Ryobi
This item works with the following types of products:
- Jig saw Parts
- Saw Parts
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Assembly Saw Bar
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Blade locking end was missing
Gary - March 19, 2019
👍 2 of 2 people found this instruction helpful
Tool Type
Jig saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Power Drill, Star bit
Parts Used
Remove remove the screws with a drill motor with a star bit sides come apart easy the only problem I had was the the you you part you piece of the up-and-down of the saw jig was not wide enough I had to take a round punch in LED sideways on a vise and tap it down into it to spread apart the you you rocket that goes on the gear what activity left once I did that it went to go get would drop dried in and went together and works of worse works fine
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Aileen - June 14, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Jig saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Hands
Parts Used
1. Put the jigsaw on a flat surface with the side of the screws up.
2. Unscrewed all the screws.
3. Removed the cover.
4. Looked carefully how the saw bar was placed, then removed it.*
5. Placed the new bar exactly the same way the other one was.
6. Put the cover back on
7. Put all 10 screws back in place and tighten them all.
*Important: There is a small spring, make sure not to miss it when dissembling
2. Unscrewed all the screws.
3. Removed the cover.
4. Looked carefully how the saw bar was placed, then removed it.*
5. Placed the new bar exactly the same way the other one was.
6. Put the cover back on
7. Put all 10 screws back in place and tighten them all.
*Important: There is a small spring, make sure not to miss it when dissembling
Did you find this story helpful?
Thanks for voting and helping fellow customers!
blade bar reciever broken
Larry - January 20, 2023
Tool Type
Jig saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
disassemble saw assy ,lubed &replaced part and reassembled works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bad saw chuck
John - March 9, 2020
Tool Type
Jig saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, emoved
Parts Used
1 removed all the Philips screws from from the saw
2 carefully pry the outer case in half.
3 remove the defective shaft and install the new shaft exacly like the defective shaft was installed.
4 reinstall the outercase and and screws.
5 Post funtion test the saw for design operation.
6 congratulations you have just repaired your first jig saw.
2 carefully pry the outer case in half.
3 remove the defective shaft and install the new shaft exacly like the defective shaft was installed.
4 reinstall the outercase and and screws.
5 Post funtion test the saw for design operation.
6 congratulations you have just repaired your first jig saw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Quick release mechanism was missing.
Joseph - March 2, 2016
👍 2 of 4 people found this instruction helpful
Tool Type
Jig saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Power Drill
Parts Used
I got the tool for free because the quick release mechanism was missing. Took out all the screws holding the jig saw together came apart very easily. Watch out there is a spring holding the saw bar, removed it and the guide placed the new part in and greased it up, put the spring and guide back in and put the shell back on, screwed it back together and it worked great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Spring assembly fell apart could not hold jig blade
Tom - December 22, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Jig saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
The installation was easy, split the case put the new bar in
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
