Easy
Less than 15 minutes
This sander pad is a genuine Porter-Cable replacement part. Over time, sander pads will wear and begin to deteriorate due to use. This sander pad will be a direct replacement for your worn out pad.
This #13700 sander pad has a smooth sanding surface for use with adhesive (sticky) sandpaper. It is not compatible with hook and loop (velcro) style sandpaper. This sander pad is 5" in diameter and it does not have vacuum holes.
This pad is compatible with the Porter-Cable sanders listed below.
This pad is compatible with the Porter-Cable sanders listed below." />
Sander Pad (psa/adhesive Back, 13700
OEM part for: Porter Cable
Part Number: 13700
$39.32
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Genuine Porter-Cable sander pad
- 5" diameter, no vacuum holes
- For use with adhesive (sticky) sandpaper
- Classification: Accessory
- Weight: 0.30 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Sander Pad (psa/adhesive Back, will fit the following 8 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Porter Cable
Show More Compatible ModelsThis item works with the following types of products:
- Sander Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
12
4 stars
2
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
Help is on the way
It's comforting to know a competent source for repair parts when the inevitable need for replacement/ repair arises.
James -
14 days ago
Verified Purchase
Exactly correct part
My orbital sander is as good as new.
Guest -
September 4, 2023
Verified Purchase
Porter Cable 4” replacement orbital sanding disk
The replacement disk was exact fit and size.
After shopping around I chose eReplacement parts to buy from. From experience I knew the disk would fit and fast service too. Their help line clears up any problems with ordering on line.
Thank you. Sander does great job again
Mal
Malcolm -
May 31, 2023
Verified Purchase
More than pleased
I own several sanders but the Porter Cable was by far my most favorite and most used. When the pad failed after a decade of use I was not willing to say goodbye to it. In short you gave me another decade of use for it. You got me as a customer for life.
Guest -
May 3, 2023
Verified Purchase
Worked great
Arrived quickly. Could not find it in the usual places but you had it. Will buy from you again.
Guest -
October 16, 2021
Verified Purchase
Sanding pad
Fast order quick delivery
Guest -
August 13, 2021
Verified Purchase
Part worked as expected. Pricey, but if product does it's job, easy to except.
easy to install
Guest -
April 11, 2021
Verified Purchase
The part was installed as I thought it would.
The part arrive very fast in perfect condition. Glad to have the tool back in good working condition.
Guest -
February 13, 2021
Verified Purchase
Porter-Cable part
Got the right part and got it fast. Thanks.
Robert -
March 12, 2020
Verified Purchase
Impressed with inventory and price
O
Guest -
January 17, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Sander Pad (psa/adhesive Back,
I don't know the type of my sander. The serial number is 092097. Can you tell me if it's type 1, 2 or 3 so I can order the correct sanding pad. The pad says "cat no 13700 standard pad". No type indication anywhere
Kenny
for model number Model 7335
asked on 2023-03-18
Hello Kenny, thank you for your question. The Number 13700 is Sander Pad (PSA/?Adhesive Back,? No Vacuum Holes,? 5 Inch) and fits 8 models listed under our Model Compatibility section located under the part number on our site. We look forward to hearing from you.
eReplacementParts Team March 18, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Sanding pad released from backing pad
Randy - October 5, 2017
👍 5 of 5 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Put wrench on nut back pad, then threaded the old pad off and threaded the new one on off.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old pad disintegrated after about 15 years!
Steve - December 8, 2015
👍 4 of 4 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Put the 692900 wrench behind the pad, held the wrench with one hand and threaded off the damaged pad with the my other hand. Reversed to attach the new pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pad had deteriorated over time. Needed a new pad.
Larry - April 2, 2016
👍 4 of 5 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Put wrench on spindle to lock turn pad frame, removed. Installed new pad by screwing onto threaded spindle. Tightened. All done. Back in fine working order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sanding pad deteriorated with age.
Mark - January 8, 2016
👍 3 of 4 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Remove old pad using open end wrench supplied with the tool. Place it behind the pad. Remove the old pad and then install the new one. Easy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The sanding pad was deteriorating from age.
Charlie - October 22, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Removed old pad by hand.
Threaded new sander pad in place by hand.
Tightened with 5/8 wrench.
Attached adhesive disc and completed project.
Porter cable orbital sander worked perfectly.
Threaded new sander pad in place by hand.
Tightened with 5/8 wrench.
Attached adhesive disc and completed project.
Porter cable orbital sander worked perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sander pad tore free from the threaded mounting plate.
Ralph - January 21, 2021
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Adjustable Wrench
Parts Used
I slid an adjustable wrench behind the pad and onto the sander’s hex shaft.
I then held the wrench in one hand and unscrewed the pad with the other hand.
To install the new pad:
With the wrench still in place the new pad is screwed onto the shaft.
I then held the wrench in one hand and unscrewed the pad with the other hand.
To install the new pad:
With the wrench still in place the new pad is screwed onto the shaft.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Existing sanding pad wearing out
Charles - December 13, 2020
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Used a wrench to unscrew the worn pad and used the wrench to tighten the new pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Previous pad wore out
Robert - August 25, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Unscrewed part and replaced with new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The sanding pad needed replacement
bernard - August 5, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Removed the sanding disc with a wrench provided with the new tool.
Installed the new pad with the same wrench.
Installed the new pad with the same wrench.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The existing pad fell apart.
Lucien - July 27, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Just screwed on the new pad tightening it with and open end wrench. Simple
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
