Rubber Foot 0047774SRV
Part Number: 0047774SRV
Order within the next 10 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 0047774.
Product Information
Specifications
|
Description:
This is a genuine Powermate replacement part, it is sold individually. It is used on the Generators shown below. The purpose of the 0047774 Rubber Foot, is it to keep the unit stabilized when it is running. And also to keep the frame off of the ground and damaging it. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 25 compatible machines
Products Compatibility
This item works with the following types of products:
- • Generator
Questions & Answers for Rubber Foot
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
8 of 10 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, 7/16\\
Fuel leak causing gasoline to leak onto the rubber vibration reducing feet. Caused the rubber feet to deteriorate.
Simply remove the attaching screws and reinstall using the new rubber feet
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Generator
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Torq driver
Ethonol ruined the carburator
Removed all the casing pieces
Removed all the fuel lines
Removed the air filter
Removed the carburetor choke cover
Removed the carburetor
Installed the new carb and gaskets
installed the fuel line from the carb to the new shut off valve
Installed the fuel line to the gas tank and new shut off valve
Replaced the choke cover
Replace the air filter
Replaced the side panel
Added gas and started the generator on first pull
Turned off the generator and washed up
Removed all the fuel lines
Removed the air filter
Removed the carburetor choke cover
Removed the carburetor
Installed the new carb and gaskets
installed the fuel line from the carb to the new shut off valve
Installed the fuel line to the gas tank and new shut off valve
Replaced the choke cover
Replace the air filter
Replaced the side panel
Added gas and started the generator on first pull
Turned off the generator and washed up
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Rubber feet dry rotting
Remove the screws that hold the rubber feet to the frame and remove them. Then attach the new rubber feet with the same screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set
The rubber feet on the generator were old and decaying making the generator unstable
The repair was quick and easy especially when you have the correct replacement parts. I tilted the generator and placed a wood block underneath. Removed the two supporting legs with rubber feet on one side, then the same on other side using the same method. Pretty simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set
Rotten rubber feet
Remove bolts and nuts from generator feet, Installed new pads
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
The feet on my Colman Powermate where falling apart.
I removed the old feet with a cresent wrench. Re used existing stanless bolts, washer, and locking nut. The old feet where falling apart and origional i think 20 something year old feet. Was suprised that Generac still makes these. With They would make the other crap for this thing still.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Original rubber feet dry rotted
Removed old feet and replaced with new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Needed to replace all four rubber feet
Removed all four rubbers and replaced with new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Generator
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Power Drill, Adjustable Wrench
Rubber feet were totally gone-gas cap gasket shot
Took old gas cap off-tossed away---removed screws holding old foot rubber, put new foot rubber on screw and replaced screw(x4)--done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Adjustable Wrench, Allen wrench set
Old rubber feet had worn out
Unbolted the old rubber feet and bolted on the new ones
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
21 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
19
4 stars
1
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
work good
good product fast shipping very satisfied
Guest -
22 days ago
Verified Purchase
Easy replacement
Perfect replacement part and arrived a day early
Guest -
March 19, 2023
Verified Purchase
Perfect.
Quick service.
Guest -
October 12, 2022
Verified Purchase
Perfect replacement.
Exactly what I needed.
Guest -
July 26, 2022
Verified Purchase
Perfect fit.
My 1850 powermate generator is like new. Ordered extras.
Guest -
April 8, 2021
Verified Purchase
great service and parts
worked great just like original part. fast service.
Guest -
March 9, 2021
Verified Purchase
Reparación fácil
Excelente condiciones, llegó rápido buen servicio
Guest -
December 7, 2020
Verified Purchase
Easy repair!
Arrived quickly!
Samuel -
December 1, 2020
Verified Purchase
Parts looked just like oem fit great
The part came quickly and was a great price.
Guest -
October 19, 2020
Verified Purchase
Worked great 👍
Got here fast
Guest -
June 25, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information