Easy
Less than 15 minutes
Rip Fence 089037011033
OEM part for: Ryobi
Part Number: 089037011033
$24.31
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This part will fit the following 2 machines
Ryobi
RTS21 10 in. Table Saw View Diagrams & Manuals
RTS21G RTS21G 10-In. Table Saw View Diagrams & Manuals
This item works with the following types of products:
- Saw Parts
- Table Saw Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Rip Fence
How long is this fence replacement?
Paul
asked on 2022-03-10
Hi Paul,
Thank you for your question. We were unable to find the specifications for the rip fence, but if you could provide us with the model number from your table saw, we will verify if this would be the correct part for it. The model number will be found on a data plate on the bottom or back of the table saw. If you could resubmit your question with this information, we would be happy to help you. We are open 7 days a week. We look forward to hearing from you!
eReplacementParts Team March 10, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
my error. fence was sitting on chop saw. I cut through a piece of wood and 3/4 way through the fence. It cut the rod also.
Harold - November 15, 2020
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
1. Removed the old cut rod and its parts from the old fence.
2. Removed the lock nut, washers, spring and end cam from the old rod.
3. Installed good parts from the old rod to the new one.
4. Positioned the new rod through the fence.
5. Installed the lock nut on the end of the new rod.
( Before disassembly of the old rod from the fence, pay attention the rod position near the handle end.)
2. Removed the lock nut, washers, spring and end cam from the old rod.
3. Installed good parts from the old rod to the new one.
4. Positioned the new rod through the fence.
5. Installed the lock nut on the end of the new rod.
( Before disassembly of the old rod from the fence, pay attention the rod position near the handle end.)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Removed existing fence which was bent
Robert - August 3, 2017
👍 1 of 2 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Adjustable Wrench, Allen wrench
Parts Used
1. Removed 2 Allen head screws, old plastic skid and lock nut, spring, washers, old fence.
2. Reassembled in reverse sequence starting with new fence .
Old fence had bent very slightly and slipped out of seat. Would not cut square. Cuts square with new fence. Be sure nut is tight enough to hold square and firm, but do not over tighten. Probably over tightening had unseated original fence.
2. Reassembled in reverse sequence starting with new fence .
Old fence had bent very slightly and slipped out of seat. Would not cut square. Cuts square with new fence. Be sure nut is tight enough to hold square and firm, but do not over tighten. Probably over tightening had unseated original fence.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
