eReplacementParts.com
877-346-4814
Jenny Parts

Ring-o 104-1020

OEM part for: Jenny

Part Number: 104-1020


Install
Videos!
Ring-o - 104-1020:Jenny 360 View
Ring-o - 104-1020:JennyRing-o - 104-1020:JennyRing-o - 104-1020:JennyRing-o - 104-1020:Jenny 360 ViewRing-o - 104-1020:Jenny
$3.99
In Stock
Ships within 1 business day
Medium 30-60 minutes (2 rated repairs)?
OEM: Original Equipment Manufacturer ?
Jenny
Does this d-block d-md-none fit my product?

Product Description ?

This is an authentic manufacturer-approved replacement part which is specially designed for use with Jenny pumps. It helps to distribute the pressure and provide an air-tight seal between the connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and applications of this hardware. Over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality rubber o-ring is sold individually.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Compatibility

This part will fit the following 17 machines

Jenny

F Series One Cylinder Single Stage Stroke Pump View Diagrams & Manuals
FU Series One Cylinder Single Stage Stroke Pump View Diagrams & Manuals
G Series Four Cylinder Single Stage Stroke Pump View Diagrams & Manuals
MG (Series) Four Cylinder Single Stage Stroke Pump View Diagrams & Manuals
GU Series Four Cylinder Single Stage Stroke Pump View Diagrams & Manuals
MGU Series Four Cylinder Single Stage Stroke Pump View Diagrams & Manuals
GC Series Four Cylinder Single Stage Stroke Pump View Diagrams & Manuals
GCU Series Four Cylinder Single Stage Stroke Pump View Diagrams & Manuals
J Series Four Cylinder Single Stage Stroke Pump View Diagrams & Manuals
JU Series Four Cylinder Single Stage Stroke Pump View Diagrams & Manuals
K Series Two Cylinder Single Stage Stroke Pump View Diagrams & Manuals
KU Series Two Cylinder Single Stage Stroke Pump View Diagrams & Manuals
GT Series Four Cylinder Two Stage Stroke Pumps View Diagrams & Manuals
GTU Series Four Cylinder Two Stage Stroke Pumps View Diagrams & Manuals
W Series Four Cylinder Two Stage Stroke Pumps View Diagrams & Manuals
WU Series Four Cylinder Two Stage Stroke Pumps View Diagrams & Manuals
K15A-17P Portable Electric Single Stage Compressor View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Pump Parts
  • Compressor Parts

Questions & Answers ?

Our customer Service team is at the ready daily to answer your part and product questions.

photo of team member
Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Questions & Answers for Ring-o


No questions have been asked yet

Customer Repair Instructions ?

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Medium 30-60 minutes (2 rated repairs)?

I have an air compressor that air was leaking out the breather.

Tony - April 24, 2018
Tool Type

Compressor

Difficulty

Easy

Time

1-2 hours

Tools Used

Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench

1. First I removed both the heads.
2. Removed the unloaded valves and replaced them
3. Removed and replaced the intake and the exhaust check valves along with the o-rings and the gaskets.

I used a parts break down and ordered the parts. The parts where correct and easy to install. It took about 2 hours and 3 cups of coffee. Very satisfied.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

Air was leaking from my compressor out of the air intake filter. The compressor was constantly refilling itself after idling for only about 15 seconds

Matthew - November 6, 2016
Tool Type

Compressor

Difficulty

Medium

Time

15-30 minutes

Tools Used

Socket set

I removed the piston unloader from the top of the pump and saw that the brass piston had broken. I simply screwed in the new piston unloader to the top of the pump and the compressor didn't leak any air. I also replaced the spring and o rings that were around the piston unloader while I had them apart. A simple fix thanks to ereplacement parts!
Did you find this story helpful?
Thanks for voting and helping fellow customers!

OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal