Watch The
Repair Video

Ring, Snap

Part Number: 11X25MA

Ships within 1 business day

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 011X25MA, 720119 and MU011X25MA.

Product Information

Manufacturer: Murray, Snapper

Product Number: 11X25MA

Classification: Part

Weight: 0.01 lbs.

Shipping: Ships Worldwide

Description:

This genuine OEM sourced replacement part that is designed for use with Murray lawn tractors. The purpose of this snap ring is to secure the pinion gear that helps the steering mechanism. One durable metal item is included per order, to install or remove this hardware you will need snap-ring pliers.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Murray

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Lawn Tractor

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

1 of 1 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Bearing - 94124MA

Ring, Snap - 11X25MA

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Snap ring pliers

Pinion gear would not engage steering gear plate due to a worn out bearing. Could not steer lawn tractor.

It was necessary to remove the fuel tank, steering wheel shaft to replace the bearing. The gear at the end of the steering shaft needed to be removed in order the remove the old bearing. To remove the gear , a pair of snap ring pliers were needed to remove the snap ring. When everything was put back together the tractor steered like when it was new.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Bearing - 94124MA

Ring, Snap - 11X25MA

Gear, Pinion - 690183MA

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Pliers, Socket set

Bearing at bottom of steering shaft wore out.

1. Remove snap ring below pinion gear on under side of mower.
2. Remove pinion gear.
3. Slide steering shaft out.
4. Remove two bolts holding bearing.
5. Replace bearing using original bolts.
6. Insert steering shaft.
7. Install new pinion gear and snap ring.

Deck must be removed first. Using snap ring pliers would have made the job easier. I was able to remove snap ring with needle nose pliers and a screwdriver.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Bearing - 94124MA

Ring, Snap - 11X25MA

Gear, Pinion - 690183MA

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Socket set, Wrench Set

Lower steering bushing wallowed out

Remove snap ring from pinion gear. Pull pinion gear off. Shove steering shaft up and out of the bearing. Reach up behind bearing and remove 2 bolts. The heads are not visible, go by feel. Once you start to turn them, the threads are visible on underside and you can see if you are on them. Take out old bearing and install new bearing same orientation. Tighten 2 bolts. Guide steering shaft down into new bearing. Reinstall pinion gear and snap ring. Good as new. I did not need new gear or snap ring, but ordered them just in case.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information

Manufacturer: Murray, Snapper

Product Number: 11X25MA

Classification: Part

Weight: 0.01 lbs.

Shipping: Ships Worldwide

Ring,​ Snap

Ring, Snap