eReplacementParts.com
877-346-4814
Campbell Hausfeld Parts
Repair Parts Home  Power Tool Parts  Campbell Hausfeld Parts  CW209300AV Pressure Switch
photo thumbnailphoto thumbnail360 degree photo thumbnail
Pressure Switch

Pressure Switch

Part Number: CW209300AV
Campbell Hausfeld
Availability: 25+ in stock
Price: $65.56
Ships within 1 business day

*This part replaces obsolete part #: and CW209300AJ.

Product Information
Manufacturer: Campbell Hausfeld
Product Number: CW209300AV
Classification: Part
Weight: 0.71 lbs.
Shipping: Ships Worldwide
Description:
Authentic Campbell Hausfeld replacement part designed to work with Campbell Hausfeld Air Compressors. The pressure switch tells your compressor when to stop and when to start. There are multiple reasons a Pressure Switch could be leaking air. If it is leaking air the Pressure Switch should be replaced for a compressor to operate properly and safely.
Compatibility

This part is compatible with the following machines:

Campbell Hausfeld
Expand the 51 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Compressor
Questions & Answers

I NEED THE REPLACEMENT PRESSURE SWITCH FOR THE MODEL AIR COMPRESSOR VT631402AJ
jose for model number VT631402AJ
Hello Jose, thank you for your inquiry! For your model VT631402AJ, the correct pressure switch is part number CW209300AV. I hope this information helps!
Is this pressure switch a 125 psi shutoff?
Brian for model number CW209300AV
Good Day Brian. Thank you for your question in regards to Part Number CW209300AV. Our research indicates that the max psi with this switch is 135. However we would refer you to your unit's owner's manual just to confirm that this is correct. Hope this helps. Best Regards.
Need pressure switch ,cant find it by part number.
ML Berson for model number VT63700AJ
Hello ML Berson and thank you for writing. We looked up the part you need, and it is listed as No Longer Available/Discontinued for your model . There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps. Please contact us anytime.
I believe the switch is bad compressor wont kick on??
Mike for model number DK614000AV
Hello Mike and thanks for writing. The model number you provided is not recognized. Please verify the number you provided us. If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. We do carry a lot of other spare parts for units such as yours, for example, Part Number: SR060513SV Good Luck with your repair.
Will this pressure release valve work on an hl7013 and if not what do you recommend since the original part is discontinued
Steve for model number Hl7013
Hello Steve, thank you for your inquiry! Unfortunately for your model HL7013 the pressure switch (p/n CW20722AV32) has been discontinued. I apologize for the inconvenience.
Do you have the proper pressure switch part number for my vertical compressor
MARC for model number VT627505AJ
Hello Marc, thank you for inquiring. This Pressure Switch part number CW209300AV is the replacement you are looking for on your model air compressor. Good luck with your repair!
I need help covering out my problem . Campbell Mansfield 5.5 up 26 gal 1" 20 volts compressor model wl611106aj Turn knob to on an unit fills to 70 lbs. Use ai..r and unit will not recharge. Cut unit off for appox 10 min and it begins rechargeing. What's wrong
Jimmy howell for model number Wl611106aj
Hello Jimmy, thank you for inquiring. This may be due to a faulty Drain Valve, part number SR060513SV, or Regulator, part number RE300000AJ for your model air compressor. Good luck with your repair!
the part number IS CW208102AV
T Wilson for model number HL700101
Hello T, thank you for your question. The replacement for that discontinued part is Part Number: CW301300SJ. I hope this helps.
Is Part number CW209300AV correct replacement part for the pressure switch on below listed model number?
Chuck for model number VT619503AJ
Hello Chuck and thanks for writing. Yes. Part Number: CW209300AV is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
Compressor cut on pressure dropped from 80 to 40 lbs, the cut on pressure is within 2 lbs of where it should be sound like that might be a switch?
James
Hello James and thanks for writing. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters. However, as a rule, the switch would be the first part to check for its function, if it is bad to remove and replace.
I need a pressure switch for this model air compressor
Bill for model number MT 500102
Hello Bill and thanks for writing. Yes. Part Number: CW208700AV is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
I need a Replacement Pressure switch part number for this 6.5 hp 60 gallon vertical compressor please
Mike for model number VT627503AJ
Hello Mike, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: CW209300AV. Hope this helps!
I have a 1983 Campbell Hausfeld 80 Gal Tank 2 stage Aircompressor. I am in need of a couple repair parts. I do not see my compressor listed on your website. Can you get parts for it?
Mark for model number TF410821V
Good Day Mark. Thank you for your question in regards to your unit (Model Number TF410821V). We do apologize but we were not able to locate a parts list for your model number. For further assistance, we recommend calling the manufacturer of the equipment directly at 800-543-6400. They may be able to provide you with the part number that you need. Best Regards. Once you have this information, please feel free to check back with us for pricing and availability information.
I need a replacement switch for this model
Darold for model number vt5587 01at
Hi Darold. I could not find an exact match for vt5587 01at. For model vt558701 the switch is part number CW212600SJ. This is likely the correct switch however if you want to make sure you can contact the manufacturer directly. Thank you for your question and good luck with your repair!
Is this pressure switch compatible with a 60 gallon HUSKY PRO compressor VT631403 model?
Joe for model number VT631403 (AGM03)
Hello, Thank you for your question. Looking at your model number that is indeed the correct pressure switch for it. -Part# CW209300AV. We hope this helps.
when my air compressor reaches 135 pressure it shuts off but the pressure valve trips and blows the air out. pressure relief valve don't trip, its the valve.
john for model number vt634600aj
Hello and thank you for writing. It is the compressor pressure switch that is supposed to shut the air compressor off when the tank pressure reaches the cut-out pressure level. If the compressor shuts off before pressure then it is a pretty good bet that the pressure switch has failed. We hope this helps. Please contact us anytime if you require further assistance.
Hi I need a pressure switch for model VS623101AJ. Ser # L9/9/97-02652. Pump # VS260000KB. Do u have replacement and if so how much
Dan for model number VS623101AJ
Hello Dan, thank you for your question. The pressure switch for that unit is Part Number: CW301300SJ. Please enter the part number into the site for current price and availability. Good luck with your repair!
Hello I have a 60 gal husky compressor I've replaced the pressure switch with part no#CW209300AV and it pumps up to 150 psi and cuts off like it should but blows off till it hits 90psi and turns compressor back on again my question is why is it blowing off that much and restarting over and over again
John for model number VT631402AJ
Good Day John. Thank you for your question in regards to your unit (Model Number VT631402AJ). Based on our research, you may need to replace one or more of the following parts in order to solve the issue that you are having: 1) Asme Safety Valve ( Part Number V-215105AV). 2) Check Valve (Part Number CV221502SJ). 3) Drain Valve (Part Number SR060513SV). 4) Unloader (Part Number CW210001AV). You can order these parts either online at our website www.eReplacementParts.com or by calling us by phone at 866-322-9842. Best Regards.
Repair Instructions: Submitted by Customers Like You
12 of 16 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Pressure Switch - CW209300AV
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set
Switch lost one leg of 220 volts-air compressor wouldn't turn on
We had checked power to motor with a stick checker. Since it showed power, we thought it was the motor. When the motor checked ok, we checked power with a volt meter and saw that one leg of the 220 volts was not coming out of the switch. We replaced the switch and it worked fine. To remove pressure switch, take all of the parts off of the switch that are not included with the new switch. Thread the old switch off, then thread the new switch on. Install all of the parts that were on the old switch, onto the new switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
8 of 10 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Pressure Switch - CW209300AV
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Nutdriver, vice
Compressor would not shut off
Remove gauge, pressure relief valve, wires and head pressure relief line.( cut line clean as close to rt. angle fitting as possible) this black plastic tube simply pushes into new rt. angle fitting.
Unscrew defective switch. Hold old part in vice and remove 1/4" pipe nipple.
Install in reverse order. Use teflon tape on all threads.

Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Pressure Switch - CW209300AV
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Pressure switch leaked.
Replaced the switch. Problem solved.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Pressure Switch - CW209300AV
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Adjustable Wrench, Thread tape
Pressure switch was leaking air
Remove the old pressure switch that are not included with the old one.
Open the cover and removed the wires, you may want to make a wiring diagram
Remove the old switch and install the new one
Install the wires on the new switch
Connect all of the parts that were removed from the old switch
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Pressure Switch - CW209300AV
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Pressure switch broken
Drain the tank of air and unplug compressor. Remove the part on the existing pressure switch that are not included with the new one. Remove the cover on the switch and make a wiring diagram. Remove the wires, then remove the defective switch. Install the new switch, install the wires as per the diagram. Replace the parts that were on the old switch to the new switch.
Make sure everything is in place. Plug it in and will work like a new compressor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Asme Safety Valve - V-215105AV
Pressure Switch - CW209300AV
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Power Drill, Wrench Set, Nutdriver, Dremel with grinder bit, drill bits, Allen head wrenches
100 to 135 setting and was supposed to be 90 to 120. It actually has a 45 psi off to on range as well.
Removed the old setup. removed the allen plug from the old and installed in the new.
Clean and prepare all threads on gauges, tank etc.
identify and rill a 5/8" hole on the side plate. Expand the hole large enough to accept the cable clamp for the supply wiring.
Install the switch on the tank. install gauges and pressure release. reconnect the wiring to the motor. Install the wiring clamp in the new hole and install the supply wiring.
Install the cover on the switch and turn the position to on. manually stop the compressor at 125 psi. This is the maximum rating for the tank this switch was supposed to be for.
made several adjustments to the pressure setting so it eventually kicked on at 80 psi and 125 psi. This proved to be a long process due to having to remove the cover each time to make the adjustment and reinstall to turn the compressor back on with bleed steps in between.

Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Pressure Switch - CW209300AV
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Nutdriver, Adjustable Wrench, Tubing bender and thread sealant
Pressure switch failed on compressor
1. Shut off power to the unit.
2. Removed wiring.
3. Removed unloader airline from the switch.
4. Removed safety valve, pressure gauge and pipe plug from the switch.
5. Removed old switch with the crescent wrench.
6. Reversed above operations.
7. Added one additional operation. The original plastic air line to the unloader was replaced with a steel line.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Pressure Switch - CW209300AV
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Wrench Set
Pressure switch on compressor burned out
Removed old pressure switch and installed new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Pressure Switch - CW209300AV
Repair Difficulty:
Expert
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Wrench Set, Adjustable Wrench
Pressure switch malfunctioning
Installed by a knowledgeable friend.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Pressure Switch - CW209300AV
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Wrench Set, Adjustable Wrench
the high pressure cutoff would not work
I contacted the Tech Support for Campbell-Hausfeld and was in touch with Marcia. She had me check a couple things and found that my ground wire was under the contactor and was not letting the high pressure switch work correctly. Also, the high pressure switch was not cutting off at over 140PSI. She said that the switch was defective and she sent me a replacement ASAP! You guys are AWESOME and really do take care of your customers!!
***** 5 STAR service!!!
Thank You!
Harry L. Hammock


Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Replacement Pressure Switch for Husky Compressor
    Easy to find on your web site, fast shipping, fair price.
    Guest - 16 days ago Verified Purchase
    Easy to install.
    The part was just what we needed to fix my husbands compressor that I broke. Easy to operate.
    Guest - February 12, 2020 Verified Purchase
    Replaced Air Compressor Pressure Switch
    The new pressure switch was easy to replace. I wire-brushed the fittings, put on new teflon tape and got the air compressor working again in under 1 hour. Very satisfied.
    Guest - July 31, 2019 Verified Purchase
    Easy direct replacement
    My compressor was 15 years old. Wouldn’t shut off then blow the pressure release valve. Diagnosed it to the switch. Ordered switch. Received in less then 7 days. Had updated part #. Fits perfect.
    Guest - July 2, 2019 Verified Purchase
    good job
    i have had great service w/ these guys,sometimes on older parts that i never thought i would find,thank you
    Guest - June 3, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Campbell Hausfeld
    Product Number: CW209300AV
    Classification: Part
    Weight: 0.71 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy