Easy
15-30 minutes
This cord is a genuine Milwaukee replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation and a cord protector for a long service life.
- Length: 8'
- Gauge: 18
- Wires: 2
- Type: Terminal
Power Cord (8-foot) 22-64-0840
OEM part for: Milwaukee
Part Number: 22-64-0840
$15.30
In Stock
Order within the next 9 hours and your part ships today! 
Jump To:
Product Description ?
- 18-2 8'
- Classification: Part
- Weight: 0.44 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Power Cord (8-foot) will fit the following 25 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Milwaukee
Show More Compatible ModelsThis item works with the following types of products:
- Sander Parts
- Grinder Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
8
4 stars
0
3 stars
1
2 stars
0
1 stars
1
< PREV
- 1
Good quality and great fit
Good quality and great fit - good price and quick delivery - can't ask for more these days
David -
August 19, 2023
Verified Purchase
Milwaukee side grinder replacement cord
Exact replacement cord. It arrived quickly. Highly recommend this company!
Thanks!
Guest -
January 21, 2022
Verified Purchase
Just Right!!
This was just a described. It arrived right on schedule. The part was the exact one I needed. Thank you eReplacementParts.
Bob -
September 4, 2021
Verified Purchase
Exact Replacement
The same cord that came on my saw from the factory. Easy replacement for a worn and frayed cord. Also, quick shipping. Good service.
Guest -
February 20, 2021
Verified Purchase
Easy Repair--Just what I needed
Fast Shipping. Part was exactly what I needed to fix my tool. Back up & running in a very short amount of time. Website was easy to navigate & find what I needed.
Guest -
September 8, 2020
Verified Purchase
Prompt delivery. Better than original cord
Exact replacement cord for my Milwaukee grinder. Quality cord that does not get stiff in the cold weather. Easy install since the connectors were already installed
Guest -
January 21, 2020
Verified Purchase
Hi Quality Replacement
Easy to install and very satisfied.
Guest -
October 14, 2019
Verified Purchase
Factory new
Ordered this cord for an older drill replacement that was frayed. Old drill was 3 prong and new cord was 2 prong. Appeared previous owner had converted it to 3 prong so had to rewire it back to factory specs Nd now works great,
Guest -
August 19, 2019
Verified Purchase
Cord Was Stiff
It had a nice, brand new look and feel to it and arrived in good timing, but it was not flexible like the cord we were trying to replace.
Guest -
August 30, 2023
Verified Purchase
power cord
the service of Ereplacement is very good but they offer expedite delivery thru the post Office service and we all know the service of USPS is the worse service there is.
Fernando -
June 8, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Power Cord (8-foot)
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The electrical cord wore out in several places for some reason prematurely.
Bruce - October 3, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx screw diver
Parts Used
1. Removed the torx head screws from the handle.
2. Took the handle apart.
3. Removed the old cord by pulling the blade style connectors apart.
4. Took the new cord, replaced it by plugging in the blade connections then put the handle back together.
2. Took the handle apart.
3. Removed the old cord by pulling the blade style connectors apart.
4. Took the new cord, replaced it by plugging in the blade connections then put the handle back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord broke at strain relief after repeated bending at the strain relief while storing the tool .I weed this tool professionally til my retirement now it is used once in a Wikileaks for my hobbie
George - April 23, 2023
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the screws that hold the case closed removed the old wire with a pair of needle nose pliers ins tallied new cord and replaced the cover job done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cut cord
John - December 3, 2022
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Opened cover
Removed cord
Connected cord
Replaced cover
Removed cord
Connected cord
Replaced cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
cord was worn out
Fernando - June 21, 2021
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
open up grinder replace connectors & cable and close it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replacement cord
RYAN - September 4, 2020
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Straight forward, Thank You.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Grinder would not run.
GARY - July 16, 2020
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Brushes were worn out and lock pin cap was missing.
Replaced brushes and lock pin with new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lock button came off leaving sharp edge
Billie - November 5, 2019
Tool Type
Grinder
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Pliers
Opened up back of grinder. Removed old pieces. Glad to see how power cord was installed. Miluakee makes good tools and seeing inside reinforced that opinion. Happy to be able to repair servicable tool back to top condition.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 1/2 inch milwaukee grinder power cord was broken
thomas - July 21, 2018
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed 4 ea screws to access old power cord , plugged in the new power cord , blew out the dust while I was there , installed the 4 ea screws that hold the case together and I was done , as far the flange goes , in some applications you use it on the drive shaft , and for some grinding wheels its not used.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Electric cord on grinder broke
William - May 14, 2018
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Unplugged the grinder.
2. Removed four screws holding the grinder case together.
3. Disconnected the spade connections on the broken cord.
4. Installed the spade connections. Almost had to use needle nose pliers to make this connection but was able to make the connection with my fingers.
5. Installed the case using caution with the fit of the cord into the restraining grooves of the case.
6. Installed the four screws.
2. Removed four screws holding the grinder case together.
3. Disconnected the spade connections on the broken cord.
4. Installed the spade connections. Almost had to use needle nose pliers to make this connection but was able to make the connection with my fingers.
5. Installed the case using caution with the fit of the cord into the restraining grooves of the case.
6. Installed the four screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cut the power cord in two.
Ron - June 24, 2017
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Torx screw driver
Parts Used
Removed motor cover. Pulled two wire clips on old cord and installed clips on new cord. Replaced motor cover and it worked like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
