Easy
15-30 minutes
This is a genuine Milwaukee replacement part that has been sourced from the original manufacturer to be used with 1/4 sheet palm sanders. The kit includes the two plastic feet, plate, and pad. The plate and pad are used to provide a flat surface to support the sandpaper. This kit is priced like a single item.
Plate And Pad Kit For 6020-21 14-67-0280
OEM part for: Milwaukee
Part Number: 14-67-0280
$25.28
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 1 machine
Milwaukee
6020-21 (SER B18A) 1/4" Sheet Palm Sander View Diagrams & Manuals
This item works with the following types of products:
- Sander Parts
This part replaces obsolete part #: 45-60-0685, 45-60-0675, 42-68-1045, 14-67-0270
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Correct part. Fast service
The part was correct. Received part in reasonable time and my sander is back in business!!
Fred -
December 30, 2021
Verified Purchase
Repaired sander in minutes with the exact parts
The parts were identical to original with some excellant improved changes. The service was competant and prompt.
Ralph -
September 8, 2021
Verified Purchase
As good as new!
This part replacement worked like a charm.
Guest -
December 25, 2020
Verified Purchase
Easy replacement
OEM makes it so easy, a no brainer.
Guest -
July 1, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Plate And Pad Kit For 6020-21
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
pad worn out
Kenneth - December 23, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
replaced with new pad
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sanding pad had worn out
Deen - March 4, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Tork driver
Parts Used
Took off old pad and replaced with new pad. Had to replace all parts that came in kit which included the brackets below the pad. Had to study a while before I found out how to take off old brackets. Once I realized how to do it, it was simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
My old base got broke , so I replace it and upgraded the foam rubber pad.
John - April 9, 2021
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
It was easy, just 4 Allen screws I removed.
The pad came off being loose when the screws were removed.
The base was next, it was a tight fit to remove, rocking back and forth while pulling and cam off.
One problem I had was, the parts kit did not have the replacement gasket for the base to sander.
So I had to be careful and remove the old one.
Reinstalled the gasket to new base.
I used an air hose to blow out all the sanding debris in sander .
Mounted base to sander and making sure the plastic mounting legs line up into base.
Set new pad with its aluminum plate onto the base.
Installed the 4 allen screws.
Added sand paper and works great......
The pad came off being loose when the screws were removed.
The base was next, it was a tight fit to remove, rocking back and forth while pulling and cam off.
One problem I had was, the parts kit did not have the replacement gasket for the base to sander.
So I had to be careful and remove the old one.
Reinstalled the gasket to new base.
I used an air hose to blow out all the sanding debris in sander .
Mounted base to sander and making sure the plastic mounting legs line up into base.
Set new pad with its aluminum plate onto the base.
Installed the 4 allen screws.
Added sand paper and works great......
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn pad
Alan - August 30, 2020
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Fine pointed knife
Parts Used
Milwaukee does not include felt replacement ring in kit. Necessary to carefully peel out old felt ( with double face tape) in order to reuse. Strange because directions say not to use old parts!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
the hold down for the sandpaper broke rendering it useless!
john - April 22, 2019
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
, various sizes of torx
Parts Used
remove old padded plate and adjoining parts with torx screwdriver from Milwaukee palm sander. line up new parts and plate and reinstall screws.
Install 1/4 sheet of sandpaper and start using
good as new
Install 1/4 sheet of sandpaper and start using
good as new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sand pad went too thin exposing the screw heads
Gustavo - July 31, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed the four screws from the old pad and plate
Installed the new parts with the screws
Installed the new parts with the screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
