- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Jump to:
Product Description
?This item is an authentic Echo replacement part that has been sourced from the original manufacturer to be used with trimmers, blowers, and pruners. The carburetor is used to supply the engine with a mixture of air and fuel in a proper ratio. Over time ethanol in gasoline can build up deposits and clog fuel passageways. This will lead to an improper fuel ratio causing the engine to idle at fluctuating RPM's, or can cause the engine to run then abruptly stop, or not start at all. If this occurs cleaning and rebuilding the carburetor may be necessary. This kit includes all the recommended parts to be replaced when cleaning the carburetor. The kit is sold complete with all the items that are photographed.
Frequently Purchased Together
?Troubleshooting
- Echo
- Trimmer
- Leaf Blower / Vacuum
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Blower wouldn\'t run
herb from OLNEY, Illinois
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- V471001191, P005003120, 12530042030
Trimmer would not start
Michael from Columbia, South Carolina
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- 12530042030
Tiller would not rev up after starting.
Jack from Scott Depot, West Virginia
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Wrench set
- Parts Used:
- V471001231, A369000480, 15901030330, 13201309820, 16340002160, 13211504920, 12530042030
2. Installed new gas line and the grommet on the tank.
3. Rebuilt carburetor with the kit.
4. installed new spark plug
Ran well after installing the above parts.
Would only run with the choke closed.
Timothy from Ellington, Connecticut
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- V471001201, 13211544331, A356000031, 12530042030, 13031042030
Carb was not metering fuel properly, and needed rebuilding.
David from Anadarko, Oklahoma
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Used Blower would not run.
LOUIS from Lake Panasoffkee, Florida
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Wrench set
- Parts Used:
- 13211544331, 12530042030
2. Removed fuel lines, grommet from Fuel Tank
3. Drained all fuel and sediment from tank
4. Disassembled, cleaned all carburetor parts
5. Bought a primer bulb retail; none was included in kit
6. Cut new gasket to Intake; none was included in repair kit.
7. Reassembled Carburetor; ... Read more Would start, not run with fresh fuel.
8. Watched YouTube video on this carburetor
9. Reassembled carburetor again, carefully Blowing Starting Ether through all passages
10. Reinstalled Carburetor & fuel lines, started and ran; adjusted mixture screws.
Had not been started in 10 years
Harrell from Merritt Island, Florida
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
- Parts Used:
- V471001191, V471001201, 13211546730, 12530042030, 12530342030
Weed eater would not crank.
Matthew from Pace, Florida
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
- Parts Used:
- P005003120, A369000480, V103001360, A226001410, A356000031, 15901731730, 12530042030, 13001642031
A fairly straight forward process. Took pictures along the way to have reference when re-assembling.
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 12530042030
| Brand | Model Number | Description |
|---|---|---|
| Echo | ES-1000 | Chipper Shredder - Shred-N-Vac |
| Echo | ES-2000 | Chipper Shredder - Shred-N-Vac |
| Echo | GT-1100 | Trimmer - Curved Shaft Grass Trimmer |
| Echo | GT-1100B | Trimmer - Curved Shaft Grass Trimmer |
| Echo | GT-2000 | Trimmer - Curved Shaft Grass Trimmer |
| Echo | GT-2103 | Trimmer - Curved Shaft Grass Trimmer |
| Echo | HT-200 | Hedge Trimmer - Hedge Trimmer |
| Echo | LHB-2100 | Leaf Blower / Vacuum - Lesco LHB-2100 (After S/N 005851) |
| Echo | LST-2100 | Trimmer - Lesco LST-2100 (After S/N 008650) |
| Echo | PB-1000 | Leaf Blower / Vacuum - Handheld |
| Echo | PB-1010 | Leaf Blower / Vacuum - Handheld |
| Echo | PE-2000 | Edger - Edger |
| Echo | PP-1200 | Pole Saw - Power Pruner |
| Echo | PP-800 | Pole Saw - Power Pruner |
| Echo | SRM-1500 | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-1501 | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-2100 | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-2110 | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-2300 | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SV-4 | Engine - Little Wonder SV-4 |
| Echo | TSI-21 | Trimmer - Tom Shanahan TSI-21 (After S/N 001001) |
| Echo | TT-21A | Trimmer - Technic Tool TT-21A (001001-055504) |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.