Part Location Diagram of 90023805016 Echo Screw
See part B-18 in the diagram
( Grid squares measure 1x1 inch )

Screw 90023805016

Manufactured by:
Echo
ERP Number:
ERP9153138
Part Number:
90023805016
Original Equipment Manufacturer ?
Special Order
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(5 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine OEM sourced replacement part designed for use with Echo blowers/trimmers. This is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. To remove or install this screw you would need a screwdriver.

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
  • Little Wonder
This part works with the following products:
  • Trimmer
  • Hedge Trimmer
  • Pole Saw
  • Leaf Blower / Vacuum
  • Chainsaw
  • Chipper Shredder
  • Edger
  • Sprayer
  • Brush Cutter
  • Chop Saw
Part# 90023805016 replaces these:
90023805016,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Trimmer needed a new pull cord. Did a tune-up( Spark Plug, Air Filter, Fuel Filter). Also replaced screws in Guard.

Matthew from PORT MONMOUTH, New Jersey

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
A051001312, 90023805016
Followed instructions on website
Did you find this story helpful?
Thank you for voting!

Carb was not metering fuel properly, and needed rebuilding.

David from Anadarko, Oklahoma

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Took off the carburetor and disassembled it completely. Cleaned the bare metal body with carb cleaner and blew it dry with compressed air. Rebuilt it with the gasket and reed kit, reinstalled it and then put on the new fuel tank, fuel filter, air filter, tank grommet and new fuel and vent lines. Installed new engine cover, spark plug, ven t for fuel tank and head guard.
Did you find this story helpful?
Thank you for voting!

Gas tank leaks at grommet and small hole in tank

Bryan from Campobello, South Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Replaced gas tank, fuel tubing grommet and stripped gas tank mounting screw
Replaced all fuel tubes (previously purchased)
Installed tubes in grommet before installing into gas tank
Spent a lot of time cleaning before replacement
Did you find this story helpful?
Thank you for voting!

Leaking gasoline and hard to start

Gregory from Shawnee, Kansas

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Replaced all the parts I purchased.
Plugs, fuel filter, air filter and gas tank.
Did you find this story helpful?
Thank you for voting!

Shield was damaged

Jose from Barrigada , Guam

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
C550000485, 90023805016
Replaced damaged shield
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9153138
Manufacturer Part Number: 90023805016
Brand Model Number Description
Little Wonder 9555 Leaf Blower / Vacuum - Mantis Blower/Shredder Vacuum
Echo 99944200540 Lawn Tractor Accessories - Grass Trimmer Attachment
Echo 99944200560 Dethatcher - Prothatch Attachment
Echo 99944200563 Dethatcher - Prothatch Attachment
Echo 99944200570 Chainsaw - Grass Trimmer Attachment
Echo 99944200610 Trimmer - Rapid Loader Trimmer Attachment
Echo 99944700170 Chainsaw - Two Wheel Cart
Shindaiwa C254 Brush Cutter - Brushcutter
Shindaiwa C344 Brush Cutter - Brushcutter
Echo CS-440 Chainsaw - Chainsaw
Echo CS-4400 Chainsaw - Chainsaw
Echo CS-450 Chainsaw - 45cc Chainsaw
Echo CS-450P Chainsaw - 45cc Professional Cutting Chain Saw
Echo CS-510 Chainsaw - Chainsaw
Echo CS-520 Chainsaw - Chainsaw
Echo CS-530 Chainsaw - Chainsaw
Echo CSG-670 Chop Saw - Cut-Off Saw
Echo CSG-6700 Chop Saw - Cut-Off Saw
Echo CSG-680 Chop Saw - Cut-Off Saw
Echo ES-1000 Chipper Shredder - Shred-N-Vac
Echo ES-2000 Chipper Shredder - Shred-N-Vac
Echo ES-210 Chipper Shredder - Shred &#39N&#39 Vac
Echo ES-2100 Chipper Shredder - Shred &#39N&#39 Vac
Echo ES-211 Chipper Shredder - Shred &#39N&#39 Vac
Echo ES-2400 Chipper Shredder - Shred &#39N&#39 Vac
Shindaiwa ES800 Sprayer - Power Sprayer, Backpack
Echo GT-1100 Trimmer - Curved Shaft Grass Trimmer
Echo GT-200 Trimmer - Curved Shaft Grass Trimmer
Echo GT-2000 Trimmer - Curved Shaft Grass Trimmer
Echo GT-2000EZR Trimmer - Curved Shaft Grass Trimmer