This label is a genuine replacement part supplied by the original equipment manufacturer. It is compatible with many different machines such as trimmers, cultivators, pruners, pumps, and vacuums. This label should be replaced if it is worn or begins to peel off. Replacing this label will keep your equipment looking pristine. No tools are needed to replace it. Simply remove the backing from the label and apply it with your hands.
Took off the carburetor and disassembled it completely. Cleaned the bare metal body with carb cleaner and blew it dry with compressed air. Rebuilt it with the gasket and reed kit, reinstalled it and then put on the new fuel tank, fuel filter, air filter, tank grommet and new fuel and vent lines. Installed new engine cover, spark plug, ven
... Read moret for fuel tank and head guard.
Read less
Did you find this story helpful?
Thank you for voting!
Echo trimmer 15 yrs old, replacement of broken parts.
1. Remove air filter cover, install new choke-run label on new cover, make sure of proper orientation of label.
2. remove/replace air filter, install new cover. save the nut bracket for the future.
3. Using torx bits, remove engine cover, clean inside as necessary.
4. using #2 phillips screwdriver remove two screws for m
... Read moreuffler, care not to damage gaskets.
5. Remove muffler cover (broken from metal fatigue)
6. install new cover, place muffler and gasket , replace phillips screws.
7. install engine cover and secure with torx screws.
8. Enjoy another season of weed/grass trimming.
Read less
Did you find this story helpful?
Thank you for voting!
Fuel system components brittle and broke. Needed carb rebuilt, but complete new carb was cheaper than the kit.
1. Removed the tank.
2. Removed the fuel lines.
3. Removed the carb and associated gaskets.
4. Installed new fuel lines and filter in the tank.
5. Installed the fuel tank.
6. Attached fuel lines to carb.
7. Installed new carb.
8. Installed new spark plug.
9. Added fuel and started b
... Read morelower.
10. Allowed engine to warm and adjusted carb settings, High, low mixture, and idle speed.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9161536
Manufacturer Part Number: 89012106360
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Manual or Literature","title":"Manual or Literature","url":"/parts/lawn-and-garden/trimmer/manuals-and-literature/"},{"position":2,"name":"89012106360","title":"89012106360","url":""}]
_(290323__Up)_WW_6.gif "Part Location Diagram of 89012106360 Echo Label-choke")
_(290323__Up)_WW_6.gif "Part Location Diagram of 89012106360 Echo Label-choke")
